Milodon oil filter adapter

Posted By: racerx

Milodon oil filter adapter - 09/13/11 10:40 PM

http://www.summitracing.com/parts/MIL-21566/Application/?prefilter=1

Anyone use one?If so can u give me the dimensions?I've just installed a crack trigger with the pickup installed on the left side of the engine so i have to relocate the oil filter so i just need to get the thickness of this adapter......Thax.

Posted By: abodiesonly1

Re: Moroso oil filter adapter - 09/14/11 04:21 AM

Height: 2.80 inches
Length: 5.10 inches
Width: 4.10 inches

Found these specs....Hope it helps

Posted By: racerx

Re: Moroso oil filter adapter - 09/15/11 05:20 AM

Quote:

Height: 2.80 inches
Length: 5.10 inches
Width: 4.10 inches

Found these specs....Hope it helps

Thax...

Posted By: racerx

Re: Moroso oil filter adapter - 09/15/11 12:38 PM

Quote:

Quote:

Height: 2.80 inches
Length: 5.10 inches
Width: 4.10 inches

Found these specs....Hope it helps

Thax. 4 those dim.
Anyone running a crank trigger with the pickup on the left side of the engine were the oil filter is?The problem I'm having is clearance problem between the filter and crank trigger pickup what r u guys doing to get around this problem pic's would be good.Thax....

Posted By: '72CudaRacer

Re: Moroso oil filter adapter - 09/15/11 11:44 PM

Heres how I did mine Kerry.

Brian Dunnigan

Attached picture 6828056-NashvilleTN12-10-11-10621.JPG

Posted By: '72CudaRacer

Re: Moroso oil filter adapter - 09/15/11 11:46 PM

Attached picture 6828057-NashvilleTN12-10-11-10634.JPG

Posted By: '72CudaRacer

Re: Moroso oil filter adapter - 09/15/11 11:46 PM

One more

Attached picture 6828062-NashvilleTN12-10-11-10622.JPG

Posted By: racerx

Re: Moroso oil filter adapter - 09/16/11 03:49 AM

Quote:

One more

Thax...

cudaracer is that a milladon pump cover? if so were u purchase it.Thax.

Posted By: hemi-itis

Re: Moroso oil filter adapter - 09/16/11 04:16 AM

While your at it,install these pre-filters in the pick up lines.I also prefer oil filters with no by-pass.Moroso oil filters have no by-pass in them.

Attached picture 6828470-Aug11032(2).jpg

Posted By: '72CudaRacer

Re: Moroso oil filter adapter - 09/16/11 01:33 PM

Quote:

Quote:

One more

Thax... cudaracer is that a milladon pump cover? if so were u purchase it.Thax.

It is a Milodon oil pump cover, but you wouldn't know it by looking at it. No name or part number stamped or cast into it. I don't remember where I purchased it, probably Music City Rod Shop though, had it for a long time for another project and just started using it last year. If you go to Milodons web site they have a lot of pictures, just pick out what you need. I have a dual line swinging pick up, but I pluged one hole and just run a single #12 line to the oil pump cover. #10 lines to and from oil filter housing.

Brian Dunnigan

Posted By: racerx

Re: Moroso oil filter adapter - 09/16/11 01:52 PM

Quote:

Quote:

Quote:

One more

Thax... cudaracer is that a milladon pump cover? if so were u purchase it.Thax.

It is a Milodon oil pump cover, but you wouldn't know it by looking at it. No name or part number stamped or cast into it. I don't remember where I purchased it, probably Music City Rod Shop though, had it for a long time for another project and just started using it last year. If you go to Milodons web site they have a lot of pictures, just pick out what you need. I have a dual line swinging pick up, but I pluged one hole and just run a single #12 line to the oil pump cover. #10 lines to and from oil filter housing.

Brian Dunnigan

Thax...I'll check it out...