Posted By: pattyboy 572
crank case evacuation systems???? - 09/11/11 03:32 AM
Crank case evacuation systems....do they work ...built 572 world block indy head..will these 35.00 systems work or will i need a 3 vane vacuum system any thoughts would be appreciated thanks pat( pump gas streetable ocassional track)
Posted By: blracing
Re: crank case evacuation systems???? - 09/12/11 12:45 PM
if installed properly, they work. but a 572 may still need a vacume pump. put a vacume gauge on it and see what you have without the pump. then you can decide what to do.
Posted By: Guitar Jones
Re: crank case evacuation systems???? - 09/12/11 01:53 PM
I have the Moroso pan evac on my car but the aspirators it came with were too stiff, they didn't open. I used some off an old slant 6 Volare that open easier and it works fine now. I probably should put a pump on it but don't really have the money to spend on that right now.
Posted By: hemi-itis
Re: crank case evacuation systems???? - 09/12/11 07:16 PM
The pan evac will work,but if it's in the budget get a vacume pump.
