Moparts

Mounting FP regulator?

Posted By: SLOW67

Mounting FP regulator? - 08/28/11 05:48 PM

I've got a Mallory 4309 regulator and where I want to mount it is about 10"-12" away from the exhaust manifold. Is this going to be too close? I really wanted to mount it on the firewall but I would like to keep the high pressure side out of the engine comp. as much as possible just incase of a leak. I'm running a walbro pump so I've got a fair amount of pressure....
Posted By: 1967dartgt

Re: Mounting FP regulator? - 08/28/11 05:57 PM

Not on the fire wall, against nhra rules. A foot from headers is fine.
Posted By: Cab_Burge

Re: Mounting FP regulator? - 08/28/11 06:28 PM

I would, and do, mount the regulators in front of the carb instaed of behind it
Posted By: HEMIFRED

Re: Mounting FP regulator? - 08/28/11 06:39 PM

Quote:

I would, and do, mount the regulators in front of the carb instaed of behind it



the only way to fly
Posted By: sixpackgut

Re: Mounting FP regulator? - 08/28/11 08:49 PM

there is 2 in this pic. the one for the carbs is at the end of the fuel log. cool fuel to carbs mounting it behind the carbs

Attached picture 6799547-051101_1955[00].jpg
Posted By: SLOW67

Re: Mounting FP regulator? - 08/29/11 03:40 AM

Thanks guys
I decided to mount it off the front carb stud...looks better too
Posted By: Stroker Scamp

Re: Mounting FP regulator? - 08/29/11 05:42 AM

got mine hangin here

Attached picture 6800289-regulator.jpg
© 2024 Moparts Forums