Posted By: tex013
anyone use this Lunati cam ? - 08/16/11 11:20 PM
as i have been looking around to swap out my 509 hydraulic for a solid with a little more power
i have been looking at this cam,has anyone run this ?
Lunati
Part # 60342
Grind # VDBCR-280
lobe seperation 110,106centreline ,251/259@050,566/586 gross lift,014 lash
i am looking for a bit more overall punch with more up top.i would prefer to keep the rpm to 6500 max.
currently shift at 6000 trap 6300
car;440+055,3764lbs,dynamic 9 1/2 5100 flash,4.1 gear 28" hoosier radial
thoughts
Tex
i have been looking at this cam,has anyone run this ?
Lunati
Part # 60342
Grind # VDBCR-280
lobe seperation 110,106centreline ,251/259@050,566/586 gross lift,014 lash
i am looking for a bit more overall punch with more up top.i would prefer to keep the rpm to 6500 max.
currently shift at 6000 trap 6300
car;440+055,3764lbs,dynamic 9 1/2 5100 flash,4.1 gear 28" hoosier radial
thoughts
Tex