Moparts

world block with jesal key way lifters

Posted By: earthmover

world block with jesal key way lifters - 08/07/11 04:26 PM

my buddy ask me to post this and see if he could get some good answers...he has the world block and lifter bores bushed ,he has the jesal key way lifters ,and would like to know if he can push rod oil the motor or does it have to use spray bar covers??????he would like to push rod oil if possible ...thanka mike
Posted By: go green

Re: world block with jesal key way lifters - 08/07/11 04:31 PM

Yes it will work .


He will have to press out the old bushings from the block and install the proper keyed lifter bores .

Keyway lifters are no a drop in part .
Posted By: earthmover

Re: world block with jesal key way lifters - 08/07/11 04:39 PM

the block was machined and set up for the keyway lifters ..he just didnt know if he could push rod oil..first build of this kind for him...just trying to make sure of whats the best way to go about some things ....do you guys think the push rod oil is better then the spray bar oil set up????whats the pros and cons of both
Posted By: go green

Re: world block with jesal key way lifters - 08/07/11 04:51 PM

If you are starting from scratch then pushrod oiling is by far the best .
Posted By: earthmover

Re: world block with jesal key way lifters - 08/07/11 05:11 PM

thanks go green i love the cuda
Posted By: bigtimeauto

Re: world block with jesal key way lifters - 08/07/11 10:30 PM

as long as the block is drilled for pushrod oiling he can, if its not nobody will want to drill it with the lifter holes drilled.

I just bought a new block to pushrod oil mine. works great will never do another mopar without pushrod oiling.
Posted By: earthmover

Re: world block with jesal key way lifters - 08/07/11 11:09 PM

how can you tell if its drilled for push rod oil..sorry for the unknown but new to this stuff..mike
Posted By: bigtimeauto

Re: world block with jesal key way lifters - 08/08/11 12:43 AM

the back of the block where the cam goes will have 2 holes in line with where the lifters go about 10 and 2 oclock. or the easiest way is look in the hole where the lifter goes if there is a hole passing thru the top going from front to back thru all of the lifter bores it is.
Posted By: HEMIFRED

Re: world block with jesal key way lifters - 08/08/11 02:09 AM

Quote:

as long as the block is drilled for pushrod oiling he can, if its not nobody will want to drill it with the lifter holes drilled.

I just bought a new block to pushrod oil mine. works great will never do another mopar without pushrod oiling.



same here
Posted By: steeldust

Re: world block with jesal key way lifters - 08/08/11 03:39 AM

Quote:

as long as the block is drilled for pushrod oiling he can, if its not nobody will want to drill it with the lifter holes drilled.

I just bought a new block to pushrod oil mine. works great will never do another mopar without pushrod oiling.

I have 572 and i have push rod oiling here i agree with you the only way to go if you can.

Attached picture 6768640-JUNEBOUNTYRACE.jpg
Posted By: earthmover

Re: world block with jesal key way lifters - 08/08/11 04:40 AM

not sure if you are saying the hole in the lifter bore is going to the back or not but when you look at the block and the lifter bores it is a small hole in the bushing of the lifter bores.. mike
Posted By: bigtimeauto

Re: world block with jesal key way lifters - 08/08/11 04:48 PM

take some picturs, one of the back of the block and one inside view of the lifter bore and we can tell you from there.
© 2024 Moparts Forums