finally made it to the track

Posted By: Steve Barton

finally made it to the track - 08/02/11 03:24 AM

Some of you no my car, 71 Scamp 4spd small block R3 416 cubs.
I have been trying my best to get it to the track, well finally I made it. I had to drive for 3 hrs and only got 3 passes and we where rained out. All three passes were back to back so no time for any changes. The car came out spinning in first and sec but still ran with a 1.43 60' 6.58 ET @ 107.8 mph 1/8th mile.
the car felt Awesome, with a few adjustment and some more time in the seat and at a proper track,I still see a 9.99 in this yet.

PS this was at a Airport strip not a pro track

Posted By: 1967dartgt

Re: finally made it to the track - 08/02/11 03:35 AM

Nice, what heads are on it?

Posted By: steeldust

Re: finally made it to the track - 08/02/11 03:43 AM

It makes all the hard work and money and time you put in the car that it takes to get to the track and if it runs good

will GOOD LUCK

AND HAVE FUN

Attached picture 6758551-JUNEBOUNTYRACE.jpg

Posted By: Steve Barton

Re: finally made it to the track - 08/02/11 03:51 AM

Quote:

Nice, what heads are on it?

I custom built them 1 7/8 tube 3 1/2 collector

Posted By: racerx

Re: finally made it to the track - 08/02/11 11:45 PM

Quote:

Quote:

Nice, what heads are on it?

I custom built them 1 7/8 tube 3 1/2 collector

I believe he's re ferry to the heads NOT the headers

Posted By: Steve Barton

Re: finally made it to the track - 08/03/11 04:49 AM

Quote:

Quote:

Quote:

Nice, what heads are on it?

I custom built them 1 7/8 tube 3 1/2 collector

I believe he's re ferry to the heads NOT the headers

silly me I geuss I still can't see straight after them three passes.

the heads are Indy's 360-2 fully ported flow 325 @ 700.
you can check out some pics if you go to my link.