Posted By: dart443
First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 01:41 AM
Second pass blew tires off,got to the top of third gear horrible vibration,you can guess the rest!!!!yes evacuation 
First pass new bullet 10.58 @ 128 then!!!!
Posted By: 1967dartgt
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 01:52 AM
Och that sucks!!!! What was the combo?
Posted By: dart443
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 01:55 AM
68 dart 493,727 5000 stall 4.10 dana
Posted By: 1967dartgt
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 01:58 AM
How bad did it go? Any thing left? I had one go with about 100 mi on it, Sucked!!
Posted By: dart443
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 02:04 AM
1 rod in 3 pieces, crank looks like someone cut it with a blowtorch!! block is done, I think I can salvage the roller cam and the top end
Posted By: dartman366
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 02:09 AM
awww crap! I hate hearing that!
Posted By: WILD BILL
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 02:19 AM
I feel your pain 
I'm so sorry
I'm so sorry
Posted By: MR_P_BODY
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 02:28 AM
Major BUMMER
Posted By: moparniac
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 02:29 AM
sorry to hear man! I wish that on NO racer!
Posted By: Dodgem
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 05:22 AM
That sucks was sorry to hear that last night!
Posted By: tboomer
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 11:43 AM
Aw man...Sorry to hear that..
Posted By: Evil Spirit
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 03:02 PM
Sorry to hear that - got any pics of the carnage?
Posted By: DragDart360
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 03:32 PM
I have one pass on my motor I'll be keeping my 
Sorry to hear of your problems, What crank and rods?
Sorry to hear of your problems, What crank and rods?
Posted By: Mr.Yuck
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 03:45 PM
Sorry to hear that...I've had the same luck as you.. 1st it was a valve that wiped out 2 pistons and the block the on the 3rd pass w/ new motor the front u-joint went and took the trans with it. Oh well it's only money I guess. Hope you can save the top end. 
Posted By: deaks
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 04:39 PM
These sort of posts, are the ones i hate to see and all racers dread. Have you any idea what may have caused all the mayhem.
Mick
Mick
Posted By: abodiesonly1
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 04:42 PM
I hate seeing these types of posts. Hopefully somethings are still salvageable!
Posted By: redruM
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/25/11 04:57 PM
Man that sucks, hopefully you can find the cause.
Posted By: FastmOp
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/26/11 04:27 PM
What rods are they?
I feel your pain.
I feel your pain.
Posted By: dart443
Re: First pass new bullet 10.58 @ 128 then!!!! - 07/27/11 02:42 AM
I think I found the problem, small crack into water # 3 cyl,hydro locked & the rest is history.The rods are 440 source.