Moparts

Ready for the Dyno!

Posted By: moparniac

Ready for the Dyno! - 07/02/11 04:49 AM

big special thanks to competition wedge for hooking me up with some great deals on parts! customer service IS top notch

Dyno Scheduled for the 15th! gonna take a vacation for a couple weeks

Posted By: MIKES_DUSTER

Re: Ready for the Dyno! - 07/02/11 04:52 AM

SWEET!!!!!!! How much hp you hoping for???

Posted By: moparniac

Re: Ready for the Dyno! - 07/02/11 05:02 AM

even though its just a number I'd like to see 800!

Guesses so far from other thread!

Tig
875Hp @ 7000 rpm

Bigcube
807 @ 7100 RPM, 733 ft/lbs @ 5400 RPM

Old School
775hp 750tq

gregsdart
810 hp at 6600 rpm

cudabin
837hp@ 6,800 rpm

cab burge
900+ HP at or above 6300 RPM with 810 Ft. Lbs

charger vj rb
861hp

mr p body
775-800HP

steeldust
850hp

robr
If it doesn't make 800 hp there's something wrong.

quiktree 485HP

Camquest is predicting 795HP

Posted By: Ari440

Re: Ready for the Dyno! - 07/02/11 05:04 AM

GOOD LUCK !

Posted By: moparniac

Re: Ready for the Dyno! - 07/02/11 11:54 AM

thx! prolly just sell it this winter or part it out! I get bored easy lol

Posted By: Big Squeeze

Re: Ready for the Dyno! - 07/02/11 02:31 PM

Quote:

even though its just a number I'd like to see 800!

Guesses so far from other thread!

Tig
875Hp @ 7000 rpm

Bigcube
807 @ 7100 RPM, 733 ft/lbs @ 5400 RPM

Old School
775hp 750tq

gregsdart
810 hp at 6600 rpm

cudabin
837hp@ 6,800 rpm

cab burge
900+ HP at or above 6300 RPM with 810 Ft. Lbs

charger vj rb
861hp

mr p body
775-800HP

steeldust
850hp

robr
If it doesn't make 800 hp there's something wrong.

quiktree 485HP

Camquest is predicting 795HP

That's funny.......Even Cab's Guesstimater is Happy.......

Posted By: old yeller

Re: Ready for the Dyno! - 07/02/11 02:43 PM

Looks nice WeDgiE...you need some money for paint?(j/k)hope u get the #,s that your looking for.

Posted By: tboomer

Re: Ready for the Dyno! - 07/02/11 02:58 PM

Good luck,wedgie...835 hp...

Posted By: Thumperdart

Re: Ready for the Dyno! - 07/02/11 04:17 PM

Looks nice and I hope it meets your expectations. I know you`re still gunnin for me..........

Posted By: Old School

Re: Ready for the Dyno! - 07/02/11 05:03 PM

Quote:

even though its just a number I'd like to see 800!

Guesses so far from other thread!

Tig
875Hp @ 7000 rpm

Bigcube
807 @ 7100 RPM, 733 ft/lbs @ 5400 RPM

Old School
775hp 750tq

gregsdart
810 hp at 6600 rpm

cudabin
837hp@ 6,800 rpm

cab burge
900+ HP at or above 6300 RPM with 810 Ft. Lbs

charger vj rb
861hp

mr p body
775-800HP

steeldust
850hp

robr
If it doesn't make 800 hp there's something wrong.

quiktree 485HP

Camquest is predicting 795HP

old school was 847-756, please dont deny me my power

Attached picture 6710324-580enginedyno.jpg

Posted By: Dunnuck Racing

Re: Ready for the Dyno! - 07/02/11 05:20 PM

Looks like a nice piece!
Just a suggestion,but see if you can take your headers and run them after it is broken in. Most dyno headers won't have primaries as long as what it looks like you have.
Keith

Posted By: an8sec70cuda

Re: Ready for the Dyno! - 07/05/11 12:54 PM

Good luck w/ it! Looks NICE!