RB intake on B engine

Specifically, I have 440-1 heads on a B engine and thought at one time there were "spacers" to run RB intakes on the B block. I have no problem machining something like that up if it will work. (Or modify some type of existing spacer)

The RB intake is too wide. Spacers will be no help.

Quote:

---

Specifically, I have 440-1 heads on a B engine and thought at one time there were "spacers" to run RB intakes on the B block. I have no problem machining something like that up if it will work. (Or modify some type of existing spacer)

---

I think your thinking of the Mopar Stage 6 heads only Not the 440-1 I recently swithed a set of 440-1 from a 440 block to my 400 stroker motor, I had to use a 440-3 intake on the 440 block and a 400-3 on the low deck