Moparts

Another “what will it run?”

Posted By: BigBlockScamp

Another “what will it run?” - 06/24/11 11:56 PM

What do you guys think this combo would be good for?
3720 lb (w/driver) Challenger
418 CI small block w/4” stroke
11.5:1 compression
Solid roller, 262/268 @ .050
Dana 60 w/4.10’s & 29.5” slick
Holley 950HP, Edelbrock Victor, ported Performer RPM heads
9.5” converter, approximately 4500 rpm stall
Pump gas
Posted By: Uncle Barry

Re: Another “what will it run?” - 06/24/11 11:58 PM

11.0
Posted By: 2QUICK4U

Re: Another “what will it run?” - 06/25/11 12:05 AM

11.50`s
Posted By: boscosis

Re: Another “what will it run?” - 06/25/11 12:07 AM

High 10.80's in perfect conditions.
Posted By: B3422W5

Re: Another “what will it run?” - 06/25/11 12:08 AM

11.20's at 119 once sorted out
Posted By: Hot 340

Re: Another “what will it run?” - 06/25/11 12:10 AM

How much porting in the heads? Id say if you are not running an small 1 5/8 header, and got fresh air into the carb, real low 11's.
Posted By: BLONDE BARRACUDA

Re: Another “what will it run?” - 06/25/11 12:39 AM

11.30 at 117
Posted By: dennismopar73

Re: Another “what will it run?” - 06/25/11 01:32 AM

Quote:

What do you guys think this combo would be good for?
3720 lb (w/driver) Challenger
418 CI small block w/4” stroke
11.5:1 compression
Solid roller, 262/268 @ .050
Dana 60 w/4.10’s & 29.5” slick
Holley 950HP, Edelbrock Victor, ported Performer RPM heads
9.5” converter, approximately 4500 rpm stall
Pump gas




11.68-11.85 116.35 mph hows that for a guess
60' 1.63-1.67
Posted By: fishy340

Re: Another “what will it run?” - 06/25/11 01:36 AM

that weight is brutal..so i say 11.30ish
Posted By: Crizila

Re: Another “what will it run?” - 06/25/11 02:29 AM

11.45 - no - - wait - - 11.49.
Posted By: Quicktree

Re: Another “what will it run?” - 06/25/11 08:10 AM

Quote:

that weight is brutal..so i say 11.30ish


no kidding he must weigh 500lbs
Posted By: viperblue72

Re: Another “what will it run?” - 06/25/11 09:08 AM

Low 11s
Posted By: Wedgeman

Re: Another “what will it run?” - 06/25/11 02:59 PM

I would go with a smaller carb....a 850 is plenty.

Gives more zip in the 60 ft, where most of the race is....

Dan
Posted By: Sport440

Re: Another “what will it run?” - 06/26/11 04:52 AM

Mid 11,s IMO, probably slower if its a untested combo.
Posted By: 383man

Re: Another “what will it run?” - 06/26/11 07:56 AM

Easy mid 11's I will say. Maybe better as them smallblock strokers just really seem to run good. Ron
Posted By: DragDart360

Re: Another “what will it run?” - 06/26/11 12:21 PM

If it doesn't go real low 11's, I think I may be real disappointed in my new motor!
Posted By: Mopar-Al

Re: Another “what will it run?” - 06/26/11 07:04 PM

I wonder how much HP/tq the engine has at the flywheel to pull 3720 lbs. It's all a guess right now. Seems like a lot of weight to get moving. Until you get a few passes and tuned up. First pass, I'd look for a high 11. Nothing always goes right first time out. Too many stories here says different. Is it safe to say expect 115 mph and around 6800 at the traps? That may be a 11.50 pass, but Im just guessing
Posted By: justinp61

Re: Another “what will it run?” - 06/26/11 07:43 PM

I'll say 11 teens after it's tuned.
Posted By: BigBlockScamp

Re: Another “what will it run?” - 07/07/11 12:17 AM

OK, I'll own up to the post. This combo is really "416challenger" on this site and it has run a 10.87 @ 122mph in good weather (and low 11's when its 100 deg out). I've always thought it runs very well and wanted some other opinions.
© 2024 Moparts Forums