What do you guys like for bearings?

Can I get some part numbers for mains, rod, cam bearings that work best for you?
572" hemi, street/strip, chev rod size.
World iron block, K1 crank, rods.
Do I remember someone not liking Clev. 77?

I have been very pleased after years and many rebuilds/inspections with Clevite MS-1277HG.

I also had great experience and long life from their coated rod bearings, CB-743HK/-743HNK

King bearings are extremely reputable. Too high end for me though

Quote:

---

Can I get some part numbers for mains, rod, cam bearings that work best for you?
572" hemi, street/strip, chev rod size.
World iron block, K1 crank, rods.
Do I remember someone not liking Clev. 77?

---

I like and use the Speed Pro CH7200 rod bearings on all my Mopar BB and hemi builds with steel rods now I use the Seal Power # 4095M full narrow groove on the Hemi and RB and # 4094 on the smaller size low deck blocks The clearances end up between .0025 to .0032 on the rods depending on the internal rod bore size and similar and bigger on the mains, also depending on the main bore sizes after align honing them Both part # look like the picture