Which coil with Digital 6 plus box

Which coil are you running with a digital 6 plus box. I am currently have a bad miss at all RPM's and I am upgrading a few older items I got and was wondering. Called MSD tech and was told the blaster 2 coil which I am currently running is the weakest coil they got. He told me I should be running the Blaster HVC 2 or the Blaster SS coil.So I thought I would ask which coil you guys are running with the box I am running.

Jeff, I don;t have the digital 6 just he good ole standard one but I know that if you're thinking of a coil upgrade check out Rick's coil.

We saw an increase in HP and TQ when we installed it after the HVC coil he uses on the dyno.

Hmmmmm.

Sounds familiar..

https://board.moparts.org/ubbthreads/show...e=0#Post6665841



Chris..

I have digital 6 and blaster 2 ... I read through the link chris posted and I do have an extra engine ground... No issues and my timing is locked out !

I run a digital 6-plus with a pertronix flamethrower-2 coil. No problems here.

I have been running the Blaster HVC coil with my digital 6 since about 2002 when I bought them as a pair. No problems.

I olso have digital 6 and blaster 2., tray a batery whit full charge

hvc here also since 2003 !!!

part # 8253

I have been using the Crane PS91 for years with my Digital 6 and before that with a 6AL.

http://www.summitracing.com/parts/CRN-730-0091/?rtype=10

Thanks for the input guys. I am hoping the rewiring of the box and new coil will make a difference.