What do we like for torque convertors? Recommendations

Posted By: Mr440GSS

What do we like for torque convertors? Recommendations - 03/18/11 03:47 PM

I have made the decision to remove the manual trans in my car and go back to an automatic. I am looking at hitting the track a little more. The car ran 120mph+ with the manual, but would never ET for a multitide of reasons.

Stock weight 68 B body
440 with box stock eddy heads
Comp .488/.491 cam
Torker II intake
Procharger with 8 psi and water/methanol injection.
3.54 gear

What kind of torque convertor should I be looking at? Some say low stall/tighter, some say higher stall/looser. The car is 75% cruiser/25% racer, so I can livve with something that may not be the greatest on the street. I just want something that will let me see the potentail of the car.

Thanks!!

Attached picture 6536294-034.JPG

Posted By: joshking440

Re: What do we like for torque convertors? Recommendations - 03/18/11 08:17 PM

Call PTC and be done with it.

Posted By: Randy..

Re: What do we like for torque convertors? Recommendations - 03/20/11 04:28 AM

Quote:

Call PTC and be done with it.

Xs 2. i've owned 5 that i can remember never a bad one,

Posted By: sdaurity

Re: What do we like for torque convertors? Recommendations - 03/20/11 06:00 PM

PTC x3

Posted By: jyrki

Re: What do we like for torque convertors? Recommendations - 03/21/11 08:17 AM

X 4. I have lately used PTC's too, and also recommended them to my friends. Think the price/quality is the best around. Even our difficult combination with a heavy car and turbos worked fine, even though we underestimated the powerlevel slightly.

Posted By: Mr440GSS

Re: What do we like for torque convertors? Recommendations - 03/21/11 10:24 PM

Just submitted a spec sheet to PTC.... Thanks!!

Posted By: blownzoom440

What do we like for torque convertors? Recommendations