Posted By: mopowergtx
4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 04:53 PM
What would a 3.31 stroke 450hp SB cross the line with in the 1/4 mile with 29" tall slicks?
4.56 gear rpm with 3.31 stroke small block in 1/4
Posted By: MR_P_BODY
Re: 4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 04:59 PM
what weight
Posted By: mopowergtx
Re: 4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 05:09 PM
About 3500 with driver.
Posted By: MR_P_BODY
Re: 4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 05:36 PM
Posted By: RemCharger
Re: 4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 05:39 PM
6 grand.
Posted By: Cab_Burge
Re: 4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 06:22 PM
Quote:It depnds on how well it leaves the starting line(spins or dead hooks) which type of trans and if it is a automatic how good the converter is and where you shift the motor at in each gear
What would a 3.31 stroke 450hp SB cross the line with in the 1/4 mile with 29" tall slicks?
If you use one of the on line calculators plug in 6 to 10 % converter slippaged to get a real world RPM 
Posted By: BLONDE BARRACUDA
Re: 4.56 gear rpm with 3.31 stroke small block in 1/4 - 03/11/11 09:13 PM
I will give a guestimate of 6200