Pictures of BB turbo setup in stock engine compartment?

I am looking to put a turbo on a BB in a early B body. Looking for placement and ideas!

Click the link in my signature.

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000670.jpg

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000672.jpg

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000671.jpg

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000654-1.jpg

1967 satellite That looks great! where did you get or how did you fabricate the turbo to intercooler piping? how did you do the exhaust crossover? Looks amazing i plan on building a smallblock turbo challenger soon and if i could get a look half this clean id be ecstatic!

The pipes are totally fabricated to "fit" where they had to go.It had to meet 2 requirements,fit under the flat hood and not sacrifice the A/C compressor. Just used a variety of elbows and bends,a sawsall and welder.I wanted to increase the tube size right out of the compressor, but I had to clear the upper radiator hose,so it stayed 2 1/2" for a short run. This was the best compromise compared to running the tube down low and across. http://i355.photobucket.com/albums/r461/FriedDonuts/P1000750.jpg This is the crossover pipe. It runs from the driver side,which has what is essentially a copy of a high perf. factory manifold,to the log on the pass. side.

Do you have pics of the rest of the hotside, manifolds, merge, and downpipe?

Saw this on the vacation last year. Gramma fresh.

No, but since the eng./trans is still out I'll get some and post them after work tomorrow.

Here is a picture of another '67 B-body. This one is a Charger.

That Coronet is on theturboforums, he's got a bunch of pics on there about how it went together, it's pretty cool.
http://www.theturboforums.com/smf/index.php?topic=140522.0

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000756.jpg driver side

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000757.jpg

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000755.jpg Pass side. I added a v band clamp for the crossover since it was out.

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000758.jpg

http://i355.photobucket.com/albums/r461/FriedDonuts/P1000759.jpg

LOOKS GOOD

In an a-body

Quote:

---

In an a-body

---

That is one of the baddest cars on the site, cant stop looking at it