Posted By: mracer360
Machine shop, boring and honing ??? - 02/13/11 01:37 AM
Is it possible to bore/hone a block an additional .010 over?? My block is now .030 over would like to go .040 over. Any info. would be great. Not sure if this would be a machine shop no no. Thanks-Mackey
Posted By: Performance Only
Re: Machine shop, boring and honing ??? - 02/13/11 02:12 AM
i do it all the time. it's not a big deal. make sure they use a torque plate on it when honing. no need to bore it for only .010 more.
Posted By: fishy340
Re: Machine shop, boring and honing ??? - 02/13/11 02:12 AM
yea my stock 340 was 40 over w a 4" crank =418ci sb..go read shadydellspeedshop web page click on FAQ its good reading
Posted By: mracer360
Re: Machine shop, boring and honing ??? - 02/13/11 11:26 PM
Thanks guys, I will go to the machine shop this week and talk to them. It is a sb and the bore currently is 4.030 and 4.040 pistons seem to be available for a 4in. stroke from probe and wiseco, not sure on what brand I will be going with, I hae run Ross for years now.