Moparts

Stock hood friendly hemi intake

Posted By: mt162

Stock hood friendly hemi intake - 01/20/11 02:19 AM

I'm running a 528 and it's a dog with the factory dual plane. Is the stage V intake the best breathing hemi intake that will clear a stock hood? Any good 4 barrel intakes that will clear?
Posted By: rowin4

Re: Stock hood friendly hemi intake - 01/20/11 06:13 AM

I'd like to know also, so I'll give it a bump.
Posted By: mr_340

Re: Stock hood friendly hemi intake - 01/20/11 07:23 AM

The Indy 426-2 is fairly flat, so it should be good for hood clearance. Don't know how it works on a street Hemi.

Attached picture 6428406-426-2b.JPG
Posted By: domingo

Re: Stock hood friendly hemi intake - 01/20/11 10:31 AM

vanke port your stock intake!
Posted By: 540challenger

Re: Stock hood friendly hemi intake - 01/20/11 02:46 PM

Quote:

I'm running a 528 and it's a dog with the factory dual plane. Is the stage V intake the best breathing hemi intake that will clear a stock hood? Any good 4 barrel intakes that will clear?


What car is it in????
Posted By: pressureangle

Re: Stock hood friendly hemi intake - 01/20/11 04:11 PM




What car is it in????




Must be in a '78 New Yorker with 2.73 gears.
Posted By: bwdst6

Re: Stock hood friendly hemi intake - 01/20/11 05:11 PM

Quote:

Must be in a '78 New Yorker with 2.73 gears.



Still should go high 11's!

I run the stock shaker hood/scoop on my cuda and have run a Ray Barton single plane with a Dominator as well as a Stage V with two Carters. Both fit but the single plane Dominator was a tight one! I probably lost some ET with the Stage V but I changed so many other things that it would be impossible to tell.
Posted By: mt162

Re: Stock hood friendly hemi intake - 01/20/11 05:47 PM

Quote:

Quote:

Must be in a '78 New Yorker with 2.73 gears.



Still should go high 11's!

I run the stock shaker hood/scoop on my cuda and have run a Ray Barton single plane with a Dominator as well as a Stage V with two Carters. Both fit but the single plane Dominator was a tight one! I probably lost some ET with the Stage V but I changed so many other things that it would be impossible to tell.




Isn't the Ray Barton intake about 2 or 3 inches taller than the stock intake?
Posted By: JohnRR

Re: Stock hood friendly hemi intake - 01/20/11 05:59 PM

Quote:

What car is it in????




X 3 , can't even remotely give you an answer with knowing what car with what hood
Posted By: bwdst6

Re: Stock hood friendly hemi intake - 01/20/11 06:03 PM

Quote:

Isn't the Ray Barton intake about 2 or 3 inches taller than the stock intake?


Sounds about right. Never actually measured it, myself.
Posted By: mt162

Re: Stock hood friendly hemi intake - 01/20/11 07:19 PM

Quote:

Quote:

What car is it in????




X 3 , can't even remotely give you an answer with knowing what car with what hood




70 Challenger with a ralley hood and the air cleaner is right against the brace with the stock intake and air cleaner. 69 Charger, same thing. I know I could go with a six pack hood, etc but I'm resisting it on these cars. I'm thinking of buying another car so are there models with substantially greater clearance under the hood with a flat hood?
© 2024 Moparts Forums