mallory 140 pump capable of 500hp plus 100hp of nitrous

is a mallory 140 pump capable of supplying a small block stroker pump gas 418 cid,with fuel for both the motor and nos.(a 100 hp tune-up) all on 1, -8 line.or should i plumb a seperate line with a holley blue pump for the fuel side of the nos system, i have run a stock 318 on motor with this set -up but at 175 hp of nitrous and worked fine, the 418 stroker ran a 7.31@94 with no tuning 1st time out on motor.16 gallon fuel cell in the bed of truck.any help would be appreciated,mike

my 140 pump got me to 10.40 and it may work but best to get a seperate system and you gan flow it without running the car on the fuel side.sorry i cant help with more.

No. Your going to need a pump that delivers 350 PPH at pressure and that pump will not do it imo.

the canister fram fuel filter will only flow 90 gph.

i have been 6.20s with a mallory 140 pump. 700+hp