Posted By: Wedgeman
360-2 Indy Heads - 12/30/10 04:20 AM
I can't find any numbers on flow data for these heads in the 180cc int runner version, only for the 230cc.......can anyone help me to find numbers for a set of ported 180cc ?
Dan
Posted By: RyanJ
Re: 360-2 Indy Heads - 12/30/10 04:22 AM
180 CC is an unported out of box -2 head..... I flowed a set long time ago.... were nothing special. 240-250 cfm?
Posted By: Wedgeman
Re: 360-2 Indy Heads - 12/30/10 04:30 AM
Ok, and if they were to be hand ported ? not by the CNC ?
Posted By: RyanJ
Re: 360-2 Indy Heads - 12/30/10 04:45 AM
Well obviously you can hand port them in any size you want from 180 all way up into the 250's.... So there is really no set guideline.... They are basically a W2 intake port, so whatever a typical W2 does @ set size, the ICH head will flow the same.
Posted By: PUNK
Re: 360-2 Indy Heads - 12/30/10 04:45 AM
They wont be 180cc anymore when they are ported. So basically, depending on how much they are opened up will dictate there flow. Also the experiance of who is doing the port work. You wouldnt want me to do it.LOL. Ryan J, Brian Hafliger of IMM and many other guys on this forum could help you out alot.
Posted By: Wedgeman
Re: 360-2 Indy Heads - 12/30/10 05:06 AM
Thanks for all the infos guys..
Posted By: Scamp408
Re: 360-2 Indy Heads - 12/30/10 02:09 PM
Just get the 230cnc from ryan and have him set them up.VJ etc in the long run your better off.
Posted By: Scamp408
Re: 360-2 Indy Heads - 12/30/10 07:33 PM
I forgot about that one.
deal with Brian or Ryan they will steer you in the right direction.