Posted By: joshking440
Billet B-1 Valley Tray - 12/20/10 04:47 PM
I remember someone talking about making one, or wanting to make one, but I dont know that I ever saw the outcome????
Does this exist
Does this exist
Billet B-1 Valley Tray
Posted By: tboomer
Re: Billet B-1 Valley Tray - 12/20/10 04:53 PM
Josh...Didn't Andy F make one? 
Posted By: pittsburghracer
Re: Billet B-1 Valley Tray - 12/20/10 04:58 PM
Tom Hemphill from Clarksburgh,Pa. makes a very nice valley pan that can be removed with the heads on. If you need more info or pictures let me know.
Posted By: joshking440
Re: Billet B-1 Valley Tray - 12/20/10 05:01 PM
Posted By: sg66mopar
Re: Billet B-1 Valley Tray - 12/20/10 05:02 PM
Yeah, pics would be nice. I called him earlier this year but he didn't have any pics. Price was $150.
Posted By: AndyF
Re: Billet B-1 Valley Tray - 12/20/10 05:02 PM
I make one for Indy heads. I'm not sure if it would work with B1 heads or not.
Posted By: sg66mopar
Re: Billet B-1 Valley Tray - 12/20/10 05:06 PM
Andy, want to donate one to my "rebuild" cause for evaluation? 
Just kidding of course but if it would fit the B1 deal I'm sure there's a few of us that would use it.
Just kidding of course but if it would fit the B1 deal I'm sure there's a few of us that would use it.
Posted By: WILD BILL
Re: Billet B-1 Valley Tray - 12/20/10 05:08 PM
Don't the B1 trays bolt to the heads as well as the block? 
Posted By: joshking440
Re: Billet B-1 Valley Tray - 12/20/10 05:10 PM
yea, it bolts to the heads
Posted By: sg66mopar
Re: Billet B-1 Valley Tray - 12/20/10 05:12 PM
Bill, the old ones did but the new ones are real similar to the Indy -1 heads. I'm actually using my old Indy vally tray with the B1 MCs I got from Scott this year.
Posted By: pittsburghracer
Re: Billet B-1 Valley Tray - 12/20/10 05:21 PM
some pictures. sorry about the glare.
Posted By: pittsburghracer
Re: Billet B-1 Valley Tray - 12/20/10 05:24 PM
Tom Hemphill's number. 724-639-9924
Posted By: joshking440
Re: Billet B-1 Valley Tray - 12/20/10 06:23 PM
that looks nice. has anyone used it, does it seal well?
Posted By: Super Scamp
Re: Billet B-1 Valley Tray - 12/20/10 06:25 PM
Quote:
Tom Hemphill's number. 724-639-9924
We just replaced the old B1 set up with a stock one from Scott. The viberation in the middle of the tray caused the old one to crack along the edge,where it bolts to the heads..
If I order one of these units, I will no longer need the bolt setup on the heads? Or just use what I got and install a piece of hard foam to stop the vibration at High RPM's.
Posted By: joshking440
Re: Billet B-1 Valley Tray - 12/20/10 06:53 PM
We had that problem, even on a low rpm deal. When we got the new tray, we ran beads of weld down both of the angles and welded a 4" long L shaped piece of aluminum to the underside to stiffin it up, its still on teh car after 7 years or so, no problems
Posted By: supercomp
Re: Billet B-1 Valley Tray - 12/20/10 07:07 PM
Best machine made me one out of 1/4 aluminum. Worked perfect.
Posted By: jkwedge540
Re: Billet B-1 Valley Tray - 12/20/10 07:45 PM
Tom hemphill makes a nice one. have had it on my motor since 2003. no problems.
Posted By: V10nacuda
Re: Billet B-1 Valley Tray - 12/20/10 10:26 PM
HEMPHILL Valley pan here, Only 1 season so far but no leaks!!!!!
Tom is a good guy to boot!!
