Intake question?

K i got a 360 out of a 95 dodge pickup i'm goin to rebuild it this month to drop it in my car and i have no idea where i could find a new intake to convert it back to carburator.So my question is where to find one and what is the correct name for it? i know this is a simple problem but i'm in high school and have no experince to work with so anything is helpful

I beleiev those are the 360"Magnum" and as I recall Edelbrock has carb-type manifolds for them. You could check some part websites (CL, E-bay etc.) but as you said, since you're new at this stuff, there's things to look out for when buying a used alum. manifold, so you may want to save your pennies & get a new one outright.

http://chucker54.stores.yahoo.net/rpmaima551rp.html

Edelbrock 7577 is an Air Gap 4 barrel manifold to convert the magnum EFI engines to carburetor.

The one on the far right
http://chucker54.stores.yahoo.net/edelbrock6.html

summit
http://www.summitracing.com/parts/EDL-7577/

Thanks for the help its much needed