TRW 2295 piston to valve clearance question

Posted By: shoebox

TRW 2295 piston to valve clearance question - 11/29/10 01:48 AM

im wondering what you guys have run as far as lift with 2295's in a 440. would i be safe to think about a 600 lift roller? of course i will clay the valve reliefs. also what kind of rpm have you turned these heavy domes?? 1100 grams i think?? wow!

Posted By: Crizila

Re: TRW 2295 piston to valve clearance question - 11/29/10 02:00 AM

Quote:

im wondering what you guys have run as far as lift with 2295's in a 440. would i be safe to think about a 600 lift roller? of course i will clay the valve reliefs. also what kind of rpm have you turned these heavy domes?? 1100 grams i think?? wow!

Only way to know for sure is moc it up and measure it.

Posted By: sam64

Re: TRW 2295 piston to valve clearance question - 11/29/10 02:05 AM

i don't think you will have any problems,those pistons sit down the hole more than 2355.i've got a 640 roller with those pistons.cracked cylinder that the machine shop didn't catch reared it head upon breakin so its in the corner for now.