Moparts

440 Source Distributor

Posted By: The Cuda Guy

440 Source Distributor - 11/17/10 05:51 PM

Anyone using it? How do you like it?

Don
Posted By: rebel

Re: 440 Source Distributor - 11/17/10 06:56 PM

i bought a Procomp dizzy from the source but i gutted it just to use with my crank trigger. it was more user friendly than the MSD i had.

Attached picture 6306329-25-08-09_20161.jpg
Posted By: The Cuda Guy

Re: 440 Source Distributor - 11/17/10 07:07 PM

Thanks for the feedback.

I'm thinking about getting one, just wanted to see if anyone else is running it and how they like it.

Don
Posted By: sixpackgut

Re: 440 Source Distributor - 11/17/10 07:17 PM

if i was in the market i would look at the firecore dist
Posted By: Quicksilver440

Re: 440 Source Distributor - 11/17/10 07:53 PM

Quote:

i bought a Procomp dizzy from the source but i gutted it just to use with my crank trigger. it was more user friendly than the MSD i had.



I just ordered one from them to gut into a cam sensor/reluctor setup.
Posted By: moparniac

Re: 440 Source Distributor - 11/17/10 08:12 PM

Quote:

if i was in the market i would look at the firecore dist



x1000
Posted By: WILD BILL

Re: 440 Source Distributor - 11/17/10 08:27 PM

Quote:

Quote:

if i was in the market i would look at the firecore dist



x1000




Posted By: fourgearsavoy

Re: 440 Source Distributor - 11/17/10 08:31 PM

Firecore is the best
Get the whole package with wires and coil and say good bye to ignition issues
Gus
Posted By: dragram440

Re: 440 Source Distributor - 11/17/10 08:45 PM

I ran that same pro comp for a year and it was shot. The bushings were all shot and made my car run like complete dog doo.I gutted it now and am using it for a mag pickup. If you do buy the pro comp they have like a 9000 series looks alot better then the ready to run 2 wire like we have. I will be upgrading as soon as money allows.
Posted By: Sinitro

Re: 440 Source Distributor - 11/17/10 09:27 PM

If you like the ProComp distributor, check your local auto swap meets for low pricing..
In SoCal @ the Long Beach Swap Meet, the ProComp distributor can be bought for $38-49 depending upon vendor..

Just my $0.02...
Posted By: The Cuda Guy

Re: 440 Source Distributor - 11/17/10 11:00 PM

Can someone post a link to a firecore dist? Thanks.

Don
Posted By: tboomer

Re: 440 Source Distributor - 11/17/10 11:05 PM

Here ya go!!
https://board.moparts.org/ubbthreads/show...e=0&fpart=1
Posted By: sunroofgtx

Re: 440 Source Distributor - 11/18/10 02:30 AM

Like was said above. The FireCore mechanical distributor is the one to get. ZERO degree's retard to 8800 rpm. The only hot-forged unit on the market. Just because something is shiny and cheap, does that make it good?

Attached picture 6306988-good-cheap-fast-services-20090701-122253.jpg
Posted By: The Cuda Guy

Re: 440 Source Distributor - 11/18/10 09:22 AM

Quote:

Here ya go!!
https://board.moparts.org/ubbthreads/show...e=0&fpart=1



Thanks guys, does anyone carry these and what are prices like? Thanks.

Don
Posted By: rebel

Re: 440 Source Distributor - 11/18/10 10:17 AM

any chance of an offset Firecore dizzy in the future?
© 2024 Moparts Forums