Moparts
spool?
Posted By:
strokin73cuda
spool? -
09/25/10
01:28 AM
Just pulled my 3.55s in a 741 case cone style suregrip, and put in a 489 case spool with 4.56s and my end play on both axles is way too much.
whats up with that?
Posted By:
DoctorDiff
Re: spool? -
09/25/10
01:30 AM
You must install a thrust block in the center of the spool, or switch to Green wheel bearings.
I have a good deal on Green bearings if you want to go that route.
E-mail me if you are interested.
© 2024
Moparts Forums