Posted By: 572B1
Yukon - 08/23/10 02:49 AM
Anyone using yukon crown wheel and pinion or there axles.
Our local diff specialist uses this brand. thanks rob.
Posted By: Islandcuda
Re: Yukon - 08/23/10 12:56 PM
I used there spool and axles in my car and had no issues. When my 83/4 blew up , the axles and spool are pretty much all that was saved, Tim
I have Yukon gears and axles in my 408 Challnger tons of street miles and abuse no problems here.
Posted By: Islandcuda
Re: Yukon - 08/23/10 04:14 PM
yes i agree, when i went to mission in vanvouver or ashcroft, some tech people would even argue with me that they were stock axles, so no not very common.
Posted By: mac56
Re: Yukon - 08/23/10 04:41 PM
I use some of their 9" parts. I have a yukon aluminum third member. Seemed good quality for the price.
Posted By: Jeepmon
Re: Yukon - 08/23/10 04:51 PM
I have them in the Duster and bought them from Dr Diff.. The only thing I was concerned about is if they are NHRA legal and Cass assured me they are..
When they arrived, they sure were pretty and I was excited to get them installed.. Now that they are installed, the hub of the axle is plain and I can understand how they could be confussed with stock axles..
If I was to order them over, I probably would spend the extra money to get a name brand axle.. There is nothing worse than arguing with tech on race day..
Yukon is real popular with the 4x4 crowd....
Posted By: Islandcuda
Re: Yukon - 08/23/10 11:21 PM
yes i agree jeepmon, i took my bill of sale to the track with me just to have something. I once took a tech guy to see the look of the stock axles and he got it.