Posted By: red70duster
340 Victor vs M-1 - 07/24/10 04:52 PM
Theres a Victor 340 available around here for $ 125.00. I am currently running the M-1 single plane. Would it be worth it to swap to the Victor? Car has a 360 stroked to 410, solid cam, 950 carb, edlebrock heads, 4500 stall convertor, and 456 rear. Currently runs 10.90 in good air. Is it worth the hassle to swap?
Posted By: MIKES_DUSTER
Re: 340 Victor vs M-1 - 07/24/10 05:57 PM
For a $125.00 bucks,its worth the try!!!
Posted By: emarine01
Re: 340 Victor vs M-1 - 07/24/10 06:07 PM
What rpm do you get max with the M1?
Posted By: AndyF
Re: 340 Victor vs M-1 - 07/24/10 06:19 PM
I don't know if it is worth the hassle or not but the Victor is a nice intake. Double check the thermostat area as well as the water fittings before you get too far. The M1 used a weird design up front on some manifolds. I'm also not a big fan of the Thermoquad carb pad that the Mopar engineers stuck on most of the M1 intakes.
Posted By: red70duster
Re: 340 Victor vs M-1 - 07/24/10 06:57 PM
I shift at 6600 and go thru the traps anywhere from 6600 to 6800 depending on what tire I am running.
