Replaced my MSD Mech Dist and HVC2 today with...

Get one.


You won't be disapointed

Is that the rtr distributor or what ignition box are you running with that?

It is our Mechanical and MSD 6 box. Don at FBO advised me not to use the RTR because its basically a race engine with no vacuum..

Cool thanks I;ll have to give him a call and see what he recommends for a mild street 470.

so that dist is smaller then the msd dist? i have a compleat msd dist with a 6al box for my 440 but its hitting my valve covers(bad) i had to grinf the crap out of the cast alum covers the dist goes in the motor but i dont have any real rotation to set the timing and now i was looking for a differnt set of alum covers that would clear
soo this dist if it IS smaller did i understand that can use a msd box??
im not wanting to change all im ignition out just basicly either run a differnt set of covers or a smaller dist that will work with what i have

Glad it went well.Rich!! Thanks for talking on the phone!!

Here's a pix o one on my 512 with EZ heads

Front view

clears the Indy heads and Indy VCs

Thanks but I'll keep my MSD you dont have to take the whole distributor apart to change the advance. If you were starting from a clean sheet why would you copy Chrysler style advance, so much easier to just remove the cap.