Oilpan for my hemi in a 65 Coronet V8 K-member

Hi,
Is this the way to go. Milodon 31010 oilpan?
Engine 528 HEMI 4.15 stroke. Schumachers engine mounts. 62-65 TTI HEMI headers.
Car 65 dodge coronet with V8 K-member.

Thanks!

NO, MILODON HEMI 8 QUART WITH internal swinging pickup and external oiling milodon oil pump imo.

http://www.summitracing.com/parts/MIL-31460/
this is what i use.

In my 64 with 528 wedge stroker I have the Milodon 30930 (low profile). I needed to cut a small piece out from the K-member for good fit. Its also use external oil pickup.

So 31010 does not fit.

Thanks.

Milodon 31010 oilpan fits just fine. I've been using one for years.

In my 64 I have a Charlie Pan

I use it in my '64 but with a hole knocked in the side for the external line.