ARP main stud torque specs?

Anybody know the torque specs for ARP main studs in a 440

I think it`s a 100ft.lbs..........

My spec sheet shows 82#. Thats an original from A.R.P. See ya, Ken

just put mine in today and alined honed it. 1/2 stud is 110 ft pounds with the ARP lube.

Post deleted by JoWeTu_6

Read this...
http://www.moparts.org/Tech/Archive/bb/5.html

My 7/16 studs get 70 ft/lbs and the 1/2 get 90 ft/lbs with moly lube

I always torque mine to 100 lb really stops cap walk and ARP states the 90 lb is only 75% of what the bolts will take

My machine shop said 100 ft lbs with the arp lube and something different with just oil. we used the arp lube at 100 lbs.

100 lbs with arp lube.

i wonder if arp changed something recently because i just got mine 2 days ago and the paper says 110ft pounds witht the lube they give you... i will see if i can get to a scanner and show you guys

I got my first set at least 15 years ago, the specs were 110 1-4 and 100#5

RIP

Quote:

---

Anybody know the torque specs for ARP main studs in a 440

---

Finger tight

Seriously my sheet showed
90 ft lbs with ARP moly lube
130 ft lbs with 30w motor oil