Moparts

M1 Tunnel Ram Gaskets - Thanks RoadHazard

Posted By: OhioGTX

M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 01:22 PM

Was not having any luck locating gaskets for the Base and Plenum of my M1 Tunnel Ram and by chance mentioned this to Greg at Superformance. Well, Greg has skills with gaskets and was able to hand make a set that looks like they came out of a die press.

Greg said he can make more if other folks need them. Not sure of the demand for these gaskets, but if you looking for some top shelf pieces, he has them.

Big thanks to Greg for the Help!

Attached picture 5946082-M1TRBaseandPlenumGasket.JPG
Posted By: Anonymous

Post deleted by Defbob - 04/25/10 02:42 PM

Posted By: WILD BILL

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 02:48 PM

Wow those are nice
Posted By: all spooled up

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 03:14 PM

i need a set for my w5 m1 t ram.. olso i met the guy last week in dalton mopar swap meet got some nice intake gaskets from him nice guy to deal with
Posted By: dirtybee

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 03:29 PM

so are these gaskets re-usable? i've seen other posts about these gaskets and they look really nice.
Posted By: greendart408

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 04:13 PM

My uncle and I both have m1 tunnel rams and would buy a few sets each if these were made. I have been saving a n.o.s. set that i got with my w5 m1 tunnel ram. Wouldnt need to any more if these were made

Attached picture 5946334-meliciabridalshower068-Copy.JPG
Posted By: mopar65

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 05:07 PM

I need a set also. thanks Mopar65
Posted By: moparbud

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 05:18 PM

i need some to how much are they a set
Posted By: ProSport

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 05:53 PM

I installed my 2 Superformance oil pan gaskets and they were by far the best gaskets I've ever used. They don't crush and they don't require sealer. With the billet rail on the 440Source fab oil pan the nuts should keep their torque also.
Posted By: Chris2581

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/25/10 06:22 PM

The Superformance gaskets are the best I've ever used as well.I installed a pan and crank scraper and the gaskets worked great.
Posted By: roadhazard

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/26/10 09:59 PM

OhioGTX (Mike) You take good pics may have to put you on the payroll
Seriously, thanks for the compliment on how they came out. I don't want to do another pair by hand though so I'd have to build a die if there is enough demand.
Your intake should remain clean on the outside now without the fuel stains for a long time to come.

The pleasure was all mine Mike!
Posted By: dennismopar73

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/26/10 10:11 PM

i would like to find one for low deck thats un cut
Posted By: roadhazard

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/27/10 01:07 AM

Thanks ProSport and Chris2421

I guess I'll get working on a die for the T-Ram gaskets
Posted By: Cab_Burge

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/27/10 05:02 AM

Quote:

Thanks ProSport and Chris2421

I guess I'll get working on a die for the T-Ram gaskets


Please put me on the list for two sets
Posted By: AndyF

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/27/10 05:18 AM

Those look great. I'd buy a few sets if they were available. I have a couple of the Mopar tunnel rams and I didn't think the gaskets were available anywhere.
Posted By: all spooled up

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/28/10 12:47 AM

Posted By: dennismopar73

Re: M1 Tunnel Ram Gaskets - Thanks RoadHazard - 04/28/10 01:32 AM

do you know where one is for sale uncut
for lowdeck?
© 2024 Moparts Forums