Moparts

Bronze Oil Pump Gear And Shaft....

Posted By: tboomer

Bronze Oil Pump Gear And Shaft.... - 04/14/10 11:58 AM

Took today off work so I could get a bunch of parts ordered....Among those is the bronze gear and shaft...Looks like the choice is MP,Milodon or 440 Source....Also have to order a good 3 bolt timing chain for the roller....Any suggestions,guys?? Thanks!! Ted
Posted By: WILD BILL

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:27 PM

You didn't lose the info I sent you on the chain did you

Posted By: blownzoom440

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:29 PM

for the timing chain i have a cloyes with 3 keyway.how much adjusting do you think you will do on the cam?
Posted By: WILD BILL

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:32 PM

Quote:

for the timing chain i have a cloyes with 3 keyway.how much adjusting do you think you will do on the cam?




Ask Scott about Taylor's cam
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:35 PM

Bill....I lost it...Mike...Hope we don't adjust much...This damn 383 is getting expensive!!
Posted By: WILD BILL

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:38 PM




I'll try and dig it up as soon as I get my laptop back from the repair shop today


Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:39 PM

OK.....I was telling Vern how this little 383 is putting a scare to ya!!
Posted By: WILD BILL

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:52 PM

Dam dude, it's in your "Pete Jackson Gear Drive" post


I can't link it till I get my lap top back but just search it using my user name
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 12:53 PM

Thanks!! So....Are you scared yet?? We both will probably pee our pants!!
Posted By: MRMOPAR622

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 01:26 PM

When I could not afford a gear drive. I went with a timing chain from Indy it does look like a nice timing chain.
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 01:31 PM

Thanks....I have also heard that is a nice chain...Did it come with everything for a roller cam?
Posted By: bad1970dust

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 03:03 PM

ted get off the dam computer and get me some parts for this thing. so you can make the first race. iam looking for a first round duck !!!
Posted By: 52savoy

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 03:19 PM

RollMaster and Cloyes are both pretty good choices. A dual idler set-up works good too and the price has come down a lot. Less than a $100.
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 03:42 PM

Quote:

ted get off the dam computer and get me some parts for this thing. so you can make the first race. iam looking for a first round duck !!!

You will get your duck... I am waiting on a couple of phone calls before I pull the trigger...
Posted By: ZIPPY

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:04 PM

A 509 purple shaft does not require a bronze gear
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:28 PM

Hi,Zippy! Look up DCC3690876 for me...I think that is the shaft I need...
Posted By: old_racer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:35 PM

Hey Ted,
don't forget to put a cam button in there also.
Russ
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:38 PM

Yupp!! Which one,Russ?? Also is there some bearing to order?
Posted By: old_racer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:46 PM

Ted,
some use the bearing type other's the alum button , I've used both, you have to mock up your front cover and water pump housing together to see what clearance you have with either. I think they are the same as the big block chebby.
Russ
Posted By: ZIPPY

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:54 PM

Quote:

Hi,Zippy! Look up DCC3690876 for me...I think that is the shaft I need...



that's the one for a Milodon pump. they're finally back in Mopar warehouse stock again, along with the 875 "normal" length one.

I guess I'll stop with the purple shaft comments
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 05:59 PM

I ordered a new Melling HV...That MP one may not work??
Posted By: ZIPPY

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 06:22 PM

you want the p3690875 number for a regular oil pump
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 06:36 PM

Thanks,Rich! I changed that on my order...[Edited by Moparts - Family Friendly Site - Keep it clean] I said....This 383 is getting pretty expensive!!
Posted By: tboomer

Re: Bronze Oil Pump Gear And Shaft.... - 04/14/10 08:11 PM

And for bad1970dust....All parts are ordered except a few gaskets!!
© 2024 Moparts Forums