Moparts

New carbs installed.

Posted By: 70HemiGTX

New carbs installed. - 04/11/10 12:44 AM

I installed the new carbs I had built this winter. Had to grind a clearance grove in the front of the intake for the acc. pump lever. Too much aluminum cast there. Can't wait to get it fired.

Attached picture 5918532-DSCF0006.JPG
Posted By: blownzoom440

Re: New carbs installed. - 04/11/10 01:35 AM

those sure look purdy. what air scoop will you use?any filter?
Posted By: 70HemiGTX

Re: New carbs installed. - 04/11/10 02:45 AM

I made a "custom" aircleaner for my other carbs that I will rework to fit this set. It uses a K&N 3" tall 6-pack filter and will sit down over the carbs a little.
Posted By: roadhazard

Re: New carbs installed. - 04/11/10 03:11 AM

More Pics!!!!

What tunnel ram did you use?
Posted By: 70HemiGTX

Re: New carbs installed. - 04/11/10 03:43 AM

It's an old Weiand.

Attached picture 5918930-DSCF0005.JPG
Posted By: Anonymous

Re: New carbs installed. - 04/11/10 03:50 AM

Any thought of putting carb spacers on instead of grinding?
Posted By: 70HemiGTX

Re: New carbs installed. - 04/11/10 04:12 AM

I only ground a spot about 3/4" long by about 3/16" wide and about 3/16" deep. Spacers are out. No room under the scoop for them also.

Attached picture 5918964-Dart7-9-08010.jpg
Posted By: 440charger500

Re: New carbs installed. - 04/11/10 05:13 AM

Are those dillman carbs? I'm getting ready to mount the same intake on my car tomorrow, looks awesome hope it hauls a$$.
Posted By: Jeremiah

Re: New carbs installed. - 04/11/10 05:16 AM

That is a thing of beauty! What is the rest of the combo?
Posted By: SG duster

Re: New carbs installed. - 04/11/10 05:26 AM

Quote:

It's an old Weiand.

nuthin wrong with an ol weiand
Posted By: 70HemiGTX

Re: New carbs installed. - 04/11/10 12:50 PM

Yes they are Dillman carbs. The rest of the combo is a 440, 516 heads (that are hogged out), 12.5 pistons, roller cam (I don't remember all the specs off the top of my head.) And a 4 speed.
Posted By: roadhazard

Re: New carbs installed. - 04/11/10 01:03 PM

I like

Have the same intake with a pair of 750 DP's and Pro Form main bodies on the shelf waiting

From what I understand the set up is worth .2-.3 in ET over a single plane set up.
Posted By: 70HemiGTX

Re: New carbs installed. - 04/11/10 01:30 PM

I should have given the carb info also. They are 660 center squirters that have been all reworked. They flow around 695 now and have metering blocks in the rear. Really nice carbs! Atleast to look at. We will find out when I fire them up.
Posted By: Anonymous

Re: New carbs installed. - 04/11/10 02:04 PM

Quote:

Quote:

It's an old Weiand.

nuthin wrong with an ol weiand



I agree 100% with that statement.

© 2024 Moparts Forums