A Little Engine Bling....

Posted By: Anonymous

A Little Engine Bling.... - 04/06/10 04:44 AM

Picked this up from a guy in Texas last weekend. Only has 4 pases on it. Gonna play around with it a bit later in the season, maybe a little match racing action

, but for now the freshened indy motor will go back in it (hoping we picked it up some from last year). Enjoy!!

In case your wndering...we have no intentions on runin the juice!! as to the size.... its just a little guy

Casey

Posted By: Al_Alguire

Re: A Little Engine Bling.... - 04/06/10 04:51 AM

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/06/10 05:21 AM

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

probably not Al... this is a family site!!!

Posted By: SG duster

Re: A Little Engine Bling.... - 04/06/10 05:38 AM

Is that an ol Mallory twin point dissy??

Posted By: B1Fish540

Re: A Little Engine Bling.... - 04/06/10 09:07 AM

very nice!

Posted By: Chris'sBarracuda

Re: A Little Engine Bling.... - 04/06/10 09:50 AM

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

If it begins with a 4.. or 5.. It's really small these days..

If it begins with a 6.. your getting somewhere..

And if it starts with a 7.. Well now you're BIG..

And if it starts with an 8.. or more ..OMG..

Did I just type that..

Chris..

Posted By: 572B1

Re: A Little Engine Bling.... - 04/06/10 10:56 AM

Quote:

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

If it begins with a 4.. or 5.. It's really small these days..

If it begins with a 6.. your getting somewhere..

And if it starts with a 7.. Well now you're BIG..

And if it starts with an 8.. or more ..OMG..

Did I just type that..

Chris..

Chesters seen it, he said its very nice.

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/06/10 02:46 PM

you guys are ridiculous!

on the distributor, it is an older mallery. not sure exactly what it is tho

Posted By: Al_Alguire

Re: A Little Engine Bling.... - 04/06/10 02:54 PM

Quote:

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

If it begins with a 4.. or 5.. It's really small these days..

If it begins with a 6.. your getting somewhere..

And if it starts with a 7.. Well now you're BIG..

And if it starts with an 8.. or more ..OMG..

Did I just type that..

Chris..

Well then it's official, mine is small it's barely over 5

Posted By: tubtar

Re: A Little Engine Bling.... - 04/06/10 04:08 PM

Quote:

Quote:

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

If it begins with a 4.. or 5.. It's really small these days..

If it begins with a 6.. your getting somewhere..

And if it starts with a 7.. Well now you're BIG..

And if it starts with an 8.. or more ..OMG..

Did I just type that..

Chris..

Well then it's official, mine is small it's barely over 5

Even stroked , mine's just over 4.
I am both jealous and humbled.

Posted By: Shaker223

Re: A Little Engine Bling.... - 04/06/10 04:42 PM

What about a 2?

Posted By: B1Fish540

Re: A Little Engine Bling.... - 04/06/10 06:40 PM

Quote:

Quote:

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

If it begins with a 4.. or 5.. It's really small these days..

If it begins with a 6.. your getting somewhere..

And if it starts with a 7.. Well now you're BIG..

And if it starts with an 8.. or more ..OMG..

Did I just type that..

Chris..

Chesters seen it, he said its very nice.

I know it has nothing to do with power, but I like the old style valve covers..Chris's are really blingy! 572 your just saying that cause yer street B1 motor is bigger than mine(only 540).

Posted By: Chris'sBarracuda

Re: A Little Engine Bling.... - 04/06/10 09:51 PM

Quote:

Quote:

Quote:

Quote:

Nice...Little, heck mine is little. Wait should I be admitting that in a public forum

If it begins with a 4.. or 5.. It's really small these days..

If it begins with a 6.. your getting somewhere..

And if it starts with a 7.. Well now you're BIG..

And if it starts with an 8.. or more ..OMG..

Did I just type that..

Chris..

Chesters seen it, he said its very nice.

I know it has nothing to do with power, but I like the old style valve covers..Chris's are really blingy 572 your just saying that cause yer street B1 motor is bigger than mine(only 540).

Now that you mention it.. I think they are pretty cool too.

Attached picture 5910969-IMG_4081(Large).jpg

Posted By: max_maniac

Re: A Little Engine Bling.... - 04/07/10 12:13 AM

Nice Casey

so maybe change engines in the 65 once in a while or you gonna drop that in the 63? Details or is it a secret...

Russ

Posted By: VernMotor

Re: A Little Engine Bling.... - 04/07/10 12:28 AM

Go ahead and get that in ,,I be over to get your old motor and put in my car LOL

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/07/10 01:03 AM

actually russ we traded the 63 for this and some cash. It will go in the 65 after Pittsburgh prolly.. it will utilize chuck millens plates for an indy crossram.

nope not a secret.

557"
KB block
BME rods
bullet .780 roller
je pistons
B1 originals fully done up by koffels
T&D rockers...

I dont no all of the nitty gritty specs off the top of my head... would have to ask the old man.

Jamie... lol that could be arranged

might be fun to see that big motor in that car of yours!

And Russ... you gonna go to the buckeye super stock race at kil-kare May 1st? will you be ready?

Casey

Posted By: tboomer

Re: A Little Engine Bling.... - 04/07/10 01:06 AM

Casey...Sounds good!! And lend your old motor to Vern....He will need it to whop up on Wild Bill!!

Posted By: VernMotor

Re: A Little Engine Bling.... - 04/07/10 02:12 AM

O man that make bill mad LOL

Posted By: tboomer

Re: A Little Engine Bling.... - 04/07/10 02:22 AM

Quote:

O man that make bill mad LOL

It would make him more mad if my 383 runs faster!! Course...He is what..2800# compared to our old heavt B body cars??

Posted By: max_maniac

Re: A Little Engine Bling.... - 04/07/10 02:22 AM

Casey, I'm kind of doubtful about being ready for anything in May

we shall see. That combo sounds kind of interesting and can't wait to see what it will do. It should be a handfull!!

Russ

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/07/10 03:34 AM

I am excited about this new motor...557cu.in. KB alum block, Venolia pistons, GRP alum rods and a fully hand ported set of Origonal B-1's. It went 7.40's in a dragster with no spray. It will go in the Coronet after Pittsburg for Beaver Springs since the rules are bare a bit lax there.

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/07/10 11:22 AM

Quote:

I am excited about this new motor...557cu.in. KB alum block, Venolia pistons, GRP alum rods and a fully hand ported set of Origonal B-1's. It went 7.40's in a dragster with no spray. It will go in the Coronet after Pittsburg for Beaver Springs since the rules are bare a bit lax there.

now thats what i'm talking about.this is gonna be a great weekend at the beaver, goodluck with the new motor, guess which car is coming?

Attached File

5911932-ChrisBaum4IslandOctober112009.bmp (42 downloads)

Posted By: WILD BILL

Re: A Little Engine Bling.... - 04/07/10 01:25 PM

Quote:

Quote:

O man that make bill mad LOL

It would make him more mad if my 383 runs faster!! Course...He is what..2800# compared to our old heavt B body cars??

Aint my fualt you guys dont want to

the weight out

And all the motor in the world wont help Verns driving

Posted By: sixpakdodge

Re: A Little Engine Bling.... - 04/07/10 02:14 PM

So does it have JE pistons with Bill Miller rods, or Venolia pistons with GRP rods?

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/07/10 03:07 PM

Poppaj is right. Grp rods and venolia pistons. I got mixed up! My bad!

That sucks to hear russ! Hopefully you will at least come out to the ccevent and hang out!

SSR I'm assuming we won't be as fast as the TS motor lol. But yea the beaver will be fun. Looking forward to it! And to meeting you and seeing that car of yours!

We are getting the 588 back from the shop today, so hopefully we can do some testing next Saturday!!

Casey

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/07/10 10:42 PM

Quote:

Poppaj is right. Grp rods and venolia pistons. I got mixed up! My bad!

That sucks to hear russ! Hopefully you will at least come out to the ccevent and hang out!

SSR I'm assuming we won't be as fast as the TS motor lol. But yea the beaver will be fun. Looking forward to it! And to meeting you and seeing that car of yours!

We are getting the 588 back from the shop today, so hopefully we can do some testing next Saturday!!

Casey

Casey, not sure if im going to be ready with the new motor, ive got too many things going on and it looks like the indy motor will be staying in till the suspension and cage are finished. my engine builder is busy with other jobs. still need a oil pan made up and also new headers.
everything else is done.oh and new carbs.
looking forward to a great weekend. you bring the beer ,ill bring the beef and chicken.

Posted By: hemi-itis

Re: A Little Engine Bling.... - 04/07/10 11:29 PM

Posted By: Anonymous

Re: A Little Engine Bling.... - 04/08/10 01:48 AM

We are really looking forward to the Beaver Springs race. I had a great time at Pitt last year and was sorry that I missed the Beaver Springs race last year. I am looking forward to meeting you East coast racers. It will be a great weekend for sure.

poppaj