Posted By: John Burdine
aluminum washers for external oil pick ups? - 03/18/10 07:28 AM
who makes/sells the aluminum washers for use with an external oil system. was it Doty? i dont remember, who sells them?
aluminum washers for external oil pick ups?
Posted By: 572B1
Re: aluminum washers for external oil pick ups? - 03/18/10 08:44 AM
Quote:
who makes/sells the aluminum washers for use with an external oil system. was it Doty? i dont remember, who sells them?
Yes Doty, I got mine through performance only racing.
Posted By: Dap
Re: aluminum washers for external oil pick ups? - 03/18/10 12:23 PM
I am pretty sure I bought mine from Greg Z.
Posted By: firefighter3931
Re: aluminum washers for external oil pick ups? - 03/18/10 01:03 PM
DMI makes that washer kit ; pn DMOSK012 ($12.99)
http://www.dotymi.com/Automotive_Home.htm
Mancini carries DMI products, you can probably order through them or from DMI direct.
Ron
http://www.dotymi.com/Automotive_Home.htm
Mancini carries DMI products, you can probably order through them or from DMI direct.
Ron
Posted By: Stanton
Re: aluminum washers for external oil pick ups? - 03/18/10 01:15 PM
A good time/place to ask this question ...
What do you use on the inside of the pan - just the pickup block ???
What do you use on the inside of the pan - just the pickup block ???
Posted By: Bob_Coomer
Re: aluminum washers for external oil pick ups? - 03/18/10 01:39 PM
Quote:
A good time/place to ask this question ...
What do you use on the inside of the pan - just the pickup block ???
I smear a coating of the "Right Stuff" on the pickup block were it pulls against the pan, then a I also smear some on the threads of the fitting that screw in the block.
Posted By: sg66mopar
Re: aluminum washers for external oil pick ups? - 03/18/10 02:57 PM
Just an O-ring here.
Posted By: mr_340
Re: aluminum washers for external oil pick ups? - 03/18/10 03:35 PM
Anyone try a sealing washer? I hope the link works.
http://www.mcmaster.com/#sealing-washers/=69sxup
Looks like you would have to click on the pressure sealing washers. I can't get it to come up with a specific page. The McNasty site is weird like that.
http://www.mcmaster.com/#sealing-washers/=69sxup
Looks like you would have to click on the pressure sealing washers. I can't get it to come up with a specific page. The McNasty site is weird like that.
Posted By: Tig
Re: aluminum washers for external oil pick ups? - 03/18/10 06:01 PM
Sealing washers similar to the above.
Not the best pic but you can sorta make them out.
The DMI kit wouldn't work because of the ribs on the pan. They work fine on another motor though.
Not the best pic but you can sorta make them out.
The DMI kit wouldn't work because of the ribs on the pan. They work fine on another motor though.
Posted By: rebel
Re: aluminum washers for external oil pick ups? - 03/18/10 07:53 PM
i bought some yellow plastic bar stock thats impervious to oils & fuel & just made the washers i wanted on a lathe. i used to have a drip on my oil fitting with the O ring but with these plastic type washers it's been great. they also clean up like new when we freshen up the engine. i think they've been recycled 5-6 times now & still no leak.
Posted By: flathood
Re: aluminum washers for external oil pick ups? - 03/18/10 08:07 PM
White nylon washer here 
Posted By: chryco
Re: aluminum washers for external oil pick ups? - 03/18/10 08:54 PM
White nylon washers here too.............
