Need pics of BB 1 3/4 headers

Posted By: Dart1031

Need pics of BB 1 3/4 headers - 03/13/10 11:48 PM

Does anyone happen to have pictures of a BB on a stand or dyno with 1 3/4" headers on it? Especially the drivers side? My engine doesn't need a bigger header, and I know the 1 7/8" headers are completely different as far as pipe routing.

I'm thinking of putting my 440 into a "brand x" and need to see how the pipes run in relation to the engine. A pic of just the header won't cut it. Kind of a long shot, but I thought I'd ask

Posted By: WILD BILL

Re: Need pics of BB 1 3/4 headers - 03/14/10 12:56 AM

I'm not sure if all are routed this way or not.

I quoted this form David_in_St_Croi in another thread

Quote:

We have Dynomax headers for a big block Mopar on the 452 in our 70 RR. They work better on the Edelbrock heads than they did on the old iron head son the 383 (same Edelbrocks were on the 383). Picture is of the 383. Going to a RobbMC starter helped a lot. A whack with a rubber deadblow hammer was needed on the starboard header to clear the Lakewood but as far as plugs go they are great and affordable. When they die I will likely use them as a model and make a set in 1-7/8 or 2"

They are 1-3/4" primaries.

Just tried to find the part number on Summit and they only show the painted version so maybe they stopped making them? If so bummer as they were an economical option. We have manual steering, it says the painted ones will not fit 67 coronet with power steering.

Good luck.

Posted By: Dart1031

Re: Need pics of BB 1 3/4 headers - 03/14/10 02:06 AM

Thanks Bill

I'll have to modify #7, but I think the rest will work. Or at least be close

Posted By: 383man

Re: Need pics of BB 1 3/4 headers - 03/14/10 07:25 AM

Dont know if this will help any but these are the 1-3/4 hedmans on my 63. Ron

Posted By: Dart1031

Re: Need pics of BB 1 3/4 headers - 03/14/10 12:17 PM

Thanks Ron

Posted By: CompWedgeEngines

Re: Need pics of BB 1 3/4 headers - 03/14/10 01:30 PM

Are you really gonna do it?...

...I hope so just so I can watch the faces on the "X" branders...

Posted By: Dart1031

Re: Need pics of BB 1 3/4 headers - 03/14/10 11:37 PM

If it doesn't sell, why not?!

Attached picture 5865204-$PassSide.2.jpg

Posted By: pushbutton

Re: Need pics of BB 1 3/4 headers - 03/14/10 11:56 PM

Quote:

Dont know if this will help any but these are the 1-3/4 hedmans on my 63. Ro

Don't mean to hi-jack,but what starter are you running with the hedmans?

Posted By: 383man

Re: Need pics of BB 1 3/4 headers - 03/15/10 12:49 AM

Quote:

Quote:

Dont know if this will help any but these are the 1-3/4 hedmans on my 63. Ro

Don't mean to hi-jack,but what starter are you running with the hedmans?

I actually use a Power Master mini starter. I just took the ext terminal off the stud and it fit fine. Ron

Posted By: pushbutton

Re: Need pics of BB 1 3/4 headers - 03/15/10 01:27 AM

Quote:

Quote:

Quote:

Dont know if this will help any but these are the 1-3/4 hedmans on my 63. Ro

Don't mean to hi-jack,but what starter are you running with the hedmans?

I actually use a Power Master mini starter. I just took the ext terminal off the stud and it fit fine. Ron

Thanks, I tried to use a MP lightweight with hedmans and it hit the # 1 tube. The full sise Mopar starter would fit,but not the small one. My headers are the 78030's.
Thanks.

Posted By: Dart1031

Re: Need pics of BB 1 3/4 headers - 03/15/10 01:38 AM

I use a V6 Dakota starter on my cars.