Posted By: SILVER67
RPM BB heads - 5903 Headers - 03/01/10 04:39 AM
Hey Guys,
Has anyone had any success with the Hooker 5903 headers on the 60929 Eddy RPM heads on an RB block in a 66-70 B-Body?
Thanks,
Michael
Posted By: ZIPPY
Re: RPM BB heads - 5903 Headers - 03/01/10 03:09 PM
They worked great for me with a B block.
There wasn't quite enough room to get a spark plug socket on two plugs on the right bank, two tiny (less than 3/8 x 3/8) dings solved that, and there weren't any other issues I can think of.
Posted By: Streetwize
Re: RPM BB heads - 5903 Headers - 03/02/10 01:43 AM
It'll be pretty tight on # 4 and 6 I think but it should work with (as Zippy said) a couple of well placed 'dings' with the back of a ball peen hammer.
Posted By: Runner
Re: RPM BB heads - 5903 Headers - 03/02/10 02:02 AM
the drivers side is a dream as far as plug placment. like zippy said a couple SMALL dings and you should be fine. also youll need a couple 90 degree boot ends and they cant be big fat boots like the msd's. these pics arent mine but they should help ya out.
http://www3.telus.net/moparstuff/TestFit/
Posted By: Runner
Re: RPM BB heads - 5903 Headers - 03/02/10 02:12 AM