Posted By: RAY1969CARS
my cheep budget w5 motor - 02/26/10 03:48 AM
low dollers guys
Quote:
ya mp 1.5s with 11/32 2.02 160 values if i was to go roller do i have to put in the tube in the oil galley ???? or could i just put in the cross over tube???? solid roller lifters
Quote:
at what point in the rpm range would you have to???
Quote:
i beleave it will spin to at least 7300 but shift at around 6800
Quote:
w5 stage 3 port
Quote:
"Budget"/"cheap"? You've got a set of $300+ valve covers on it & an oil pan that costs over $400 LOL
Quote:
Are those 2" hooker headers? I make up a new batch of cuss words every time I put mine in. Motor Specs? size?
Quote:
Humm... Cheep W5 Thats what I thought when I first started
Quote:Quote:
Humm... Cheep W5 Thats what I thought when I first started
I'm just starting on my journey into cheap W-5 engine territory...for a lifelong BB man! I handed a buddy a grand this weekend for a well-used set of heads, fresh from the shop, and set up for a roller, HS rockers, pushrods, dominator intake, and header adapters. When the Valiant engine gets tired, I'll bolt them onto my bushed lifter bore X block with 3.79 steel crank..so all I need is rods, pistons, and a cam!! How expensive can that be??? It's just a small-block right?? I feel like I'm sliding down a slippery slope as I type. Probably be a cheap deal right up until the time I drive down the hill into Indio!!