sm block herbert roller lifter??pics added

just got my herbert solid roller lifters for my small block stroker,which way does the lifter link go?mike

Link bar goes on the cylinder side of the valley.

The v in the bar would point towards the carb if it was there.

herbert had told me the opposite on the phone,thats why i was questioning it.i dont have the heads on it yet to check pushrod angle.

Are those the Drop-im lifters?? If so,can you post some pics??

mikes duster;yes drop in stylelifter, i will post some pics ;it wont be until after 11;30 when i get home from work.

another pic

bump for mikes duster

When you drop them in you see why the V points towards the carb. It is there to clear part of the block where a straight T-bar won't work.

Will those pushrod oil? Anyone running these for a Mopar with success?

No on the push rod oil. I have had them in since 08 with no problems yet

Thanks HP!!!! Can you post some pic with them in your block??

I know on my 360 block i had to do some minor grinding with a die grinder to get those lifters into the lifter bores. the lifters adjacent to the #8 cylinder took the most work, but it wasn't anything i'd worry about or wouldn't do again.-Andy

I had to grind the block to get my comp 828's to fit. I think that is standard practice unless you get the MEGA bucks new reverse bar lifters. I will always wonder why turning the bar around adds $200 to the price of a set of lifters.....Looks like Herbert has some business coming his way.