Moparts

Mancini intake-carb package ?

Posted By: 383man

Mancini intake-carb package ? - 02/10/10 06:24 AM

Mancini offer's an inline Eddy intake for the RB eng that comes with two 600 carbs. My question is that is this a new intake design or an old one. Also would it perform better then the crossram and as good as my Holley Street Dominator intake and 850 DP on my mild 440 in my 63 ? Ron


Here is the intake:
http://chucker54.stores.yahoo.net/440weinmapa.html
Posted By: 64hemi330sedan

Re: Mancini intake-carb package ? - 02/10/10 12:37 PM

RON I HAVE TRIED IT.THE FIRST ONE I TRIED WAS THE OLD DESIGN ITS SHORTER.I ALSO TRIED THE NEWER INLINE EDELBOCK TWO FOURS.MY CAR IS TWO TO THREE TENTHS FASTER WITH A M1 AND A EIGHT FIFTY HOLLEY.IM AT THE SAME DELIMA YOU ARE.I WANT TO BE N/SS LEGAL BUT HATE TO GIVE UP THE ET AND MPH.STEVE. P.S SORRY FOR THE CAPS ITS A WORK THING.

Attached picture 5794718-CopyofIMG_2741.jpg
Posted By: nss guy

Re: Mancini intake-carb package ? - 02/10/10 02:09 PM

The NMCA rules for NSS mopar "wedge" engines is as follow:
•"Chrysler Wedge; Inline or cross-ram 2x4 or single 4bbl intake with Carters, AFBs, or Edelbrocks"

You guys can keep your single 4bbl intake and just switch to an AFB type carb.Then switch back to your holley when bracket racing.
Double check the NMCA rules,
as far as the Chrysler Classic Max Wedge class, it has different rules and the inline eddie manifold is not legal. You would need to clarify with CC Events what manifolds are legal.

Jim
Posted By: AndyF

Re: Mancini intake-carb package ? - 02/10/10 04:18 PM

That is the Edelbrock CH-28 intake. It actually makes fairly good power for a low profile dual plane. A good single plane intake will make more power but the CH-28 does okay. It made about 615 hp on my 505 shortblock.

Attached picture 5795048-CH28black.jpg
Posted By: Kevins493

Re: Mancini intake-carb package ? - 02/10/10 04:38 PM

Ron, 422 will let yuo run a single afb....they let dave run an 850 dp.
Posted By: JAKE68

Re: Mancini intake-carb package ? - 02/10/10 08:45 PM

Quote:

The NMCA rules for NSS mopar "wedge" engines is as follow:
•"Chrysler Wedge; Inline or cross-ram 2x4 or single 4bbl intake with Carters, AFBs, or Edelbrocks"

You guys can keep your single 4bbl intake and just switch to an AFB type carb.Then switch back to your holley when bracket racing.
Double check the NMCA rules,
as far as the Chrysler Classic Max Wedge class, it has different rules and the inline eddie manifold is not legal. You would need to clarify with CC Events what manifolds are legal.

Jim


That intake is legal for cc events. Looked in rules and it says cast inline or x ram or indy style.
Posted By: 383man

Re: Mancini intake-carb package ? - 02/11/10 06:37 AM

Quote:

Ron, 422 will let yuo run a single afb....they let dave run an 850 dp.




Well thats cool as I have an 850 DP on it now. Thanks for the replies. Ron
Posted By: Kevins493

Re: Mancini intake-carb package ? - 02/11/10 06:40 AM

Send Rich an email and see what he says. I know they do make you run some sort of lettering on the car.
Posted By: max_maniac

Re: Mancini intake-carb package ? - 02/11/10 12:13 PM

Quote:

Quote:

The NMCA rules for NSS mopar "wedge" engines is as follow:
•"Chrysler Wedge; Inline or cross-ram 2x4 or single 4bbl intake with Carters, AFBs, or Edelbrocks"

You guys can keep your single 4bbl intake and just switch to an AFB type carb.Then switch back to your holley when bracket racing.
Double check the NMCA rules,
as far as the Chrysler Classic Max Wedge class, it has different rules and the inline eddie manifold is not legal. You would need to clarify with CC Events what manifolds are legal.

Jim


That intake is legal for cc events. Looked in rules and it says cast inline or x ram or indy style.



The way I read the rule for CC Events is that the intake is not legal. This is word for word in their rules and I was at a MW meeting a few years ago when they let in the 65 cars and they said then no inline dual 4's permitted. It states cast or aftermarket cross rams or Indy style. So does the intake everyone is referring to an Indy Style intake I guess it's all up for debate.

d. Intake Manifold: Must be cast production or aftermarket dual four cross-rams or dual four “Indy-style” inline manifolds. No aftermarket sheet metal or fabricated intake manifolds allowed. No direct in line allowed.

Russ
Posted By: old_racer

Re: Mancini intake-carb package ? - 02/11/10 01:37 PM

someone should lobby to get them excepted, maybe if they're looking to get more cars they'd look into it, show them chrysler used straight inline intakes on the 383 and 413's. this could be said to be and updated version.
Russ
Posted By: JAKE68

Re: Mancini intake-carb package ? - 02/11/10 03:23 PM

Quote:

Quote:

Quote:

The NMCA rules for NSS mopar "wedge" engines is as follow:
•"Chrysler Wedge; Inline or cross-ram 2x4 or single 4bbl intake with Carters, AFBs, or Edelbrocks"

You guys can keep your single 4bbl intake and just switch to an AFB type carb.Then switch back to your holley when bracket racing.
Double check the NMCA rules,
as far as the Chrysler Classiit has different rules and the inline eddie manifold is not legal. You would need to clarify with CC Events what manifolds are legal.

Jim


That intake is legal for cc events. Looked in rules and it says cast inline or x ram or indy style.



The way I read the rule for CC Events is that the intake is not legal. This is word for word in their rules and I was at a MW meeting a few years ago when they let in the 65 cars and they said then no inline dual 4's permitted. It states cast or aftermarket cross rams or Indy style. So does the intake everyone is referring to an Indy Style intake I guess it's all up for debate.

d. Intake Manifold: Must be cast production or aftermarket dual four cross-rams or dual four “Indy-style” inline manifolds. No aftermarket sheet metal or fabricated intake manifolds allowed. No direct in line allowed.

Russ


Sorry about that I guess I should have read all if it.
Posted By: 64hemi330sedan

Re: Mancini intake-carb package ? - 02/11/10 09:26 PM

Quote:

someone should lobby to get them excepted, maybe if they're looking to get more cars they'd look into it, show them chrysler used straight inline intakes on the 383 and 413's. this could be said to be and updated version.
Russ

ding! ding! ding! we have a winner! but that aint gonna happen.beacuse theres too much indy involvment there.
Posted By: tboomer

Re: Mancini intake-carb package ? - 02/11/10 09:59 PM

Indy sells Edelbrock products..And could sell more if they would lobby CC Events to allow the inline intake...
Posted By: old_racer

Re: Mancini intake-carb package ? - 02/11/10 10:25 PM

Hi,
I just talked to Chris Schneider of the midwest nostalgia super stock 5 race series coming up this year, and he said no problem what so ever with that intake setup. If you have any question about the series please feel free to call Chris at 573-644-3272.
Russ

Attached picture 5797934-cordova.jpg
Posted By: tboomer

Re: Mancini intake-carb package ? - 02/11/10 10:33 PM

Russ...He told me it was legal for the 5 race series,too...Real nice guy to talk with!! I got your e-mail...Thanks!!
Posted By: 383man

Re: Mancini intake-carb package ? - 02/11/10 10:37 PM

I would only plan to run a few events here on the east coast in the Md , NJ and PA area. My 63 is a street car I drive but I still like to race it some and racing with the NSS cars is what I like. I wanted to build my new eng to put my 63 in the 10's but funds are to tight now. Thats why if I go to a dual four intake I would like to still run mid 11's as I do with the Holley Street Dominator intake and 850 DP. Thanks for the replies. Ron
Posted By: old_racer

Re: Mancini intake-carb package ? - 02/11/10 10:45 PM

Hey Ron,
you should be able to run 11:00 flat no problem with that intake, plus I don't see why you couldn't modify it like the vanke hemi one to help on the top end. I ran the stock one on my hemi , then the vanke one and picked up 2 tenths.
russ
Posted By: GTXX

Re: Mancini intake-carb package ? - 02/13/10 06:58 PM

what are the air cleaner choices using this 2x4 set-up? would be neat if there was a Six-Pak style for it
Posted By: kissmyaspen

Re: Mancini intake-carb package ? - 02/13/13 02:47 PM


anyone using this set-up yet?
Posted By: old_racer

Re: Mancini intake-carb package ? - 02/13/13 02:55 PM

there are 2or3 guys using this set up in our Victory nostalgia series, one is running mid 10s the others around 11flat .
Posted By: 1969RR

Re: Mancini intake-carb package ? - 02/13/13 03:15 PM

Hey guy's, I have this set-up from Mancini also. Now, I don't race my car,not have I done any dyno testing, but I love the way it runs and it's street manners. Very good throttle response. Almost a "bolt-on" and go set-up. I did very little to get it to run great! I'm including a couple pix of the set-up, fuel lines I fab'd and the "6 pak" style air cleaner. Take care! Jeff

Attached picture 7586691-DSC01267-001.JPG
Posted By: 1969RR

Re: Mancini intake-carb package ? - 02/13/13 03:16 PM

Nuther pic

Attached picture 7586693-DSC01307-001.JPG
Posted By: kissmyaspen

Re: Mancini intake-carb package ? - 02/13/13 03:51 PM

Quote:

there are 2or3 guys using this set up in our Victory nostalgia series, one is running mid 10s the others around 11flat .


Then i should have problem running 11.50-12.00 with it..
1969RR look like a nice clean set-up you have.
© 2024 Moparts Forums