Gotta little more done

Posted By: WILD BILL

Gotta little more done - 01/30/10 01:47 AM

I finally got back out to Scott's and got a little more done.

Firt step was to measure the piston depth so we knew how much to cut. I was a little surprised that they were fairly close all around. RH side was .0435 in the out board cylinders while the LH was .039 and .0415. For some reason I expected it have more of a varience.

Well it has no varience now. The deck was cut to give an .010 depth

Alot better than my previous .102 in the hole

I also got the inside of the block painted. Surprisingly didn't get much on me though

While I painting Scott started working on the heads.

OOTB flow was 269 @ 800 on a supre flow bench

Flowed after getting worked they went to 306 @ 800. I think he said they were at 298 at 600 and 700. Maybe he should chime in with the all the flow data in case my memory is shot

Some comparison shots

Inside of the block all painted. Now for some color on the outside

Posted By: 69CHARGERMD

Re: Gotta little more done - 01/30/10 02:09 AM

NICE Bill.......going to be very cool.........

Posted By: Butch

Re: Gotta little more done - 01/30/10 02:19 AM

Very nice Bill.

Posted By: DoubleD

Re: Gotta little more done - 01/30/10 02:25 AM

That is looking real nice - are those your old eddy's ? - look out nines here he comes

Posted By: WILD BILL

Re: Gotta little more done - 01/30/10 02:30 AM

Quote:

are those the B1-BS heads?

Might be on the work bench but mine are Eddy RPM.

Posted By: blownzoom440

Re: Gotta little more done - 01/30/10 02:42 AM

very nice!that takes a long time to do.
get er done.

Posted By: sg66mopar

Re: Gotta little more done - 01/30/10 02:54 AM

Five weeks 'til our season starts. Better step it up a little there dude.

Got that physical scheduled yet?

Posted By: 69CHARGERMD

Re: Gotta little more done - 01/30/10 03:20 AM

Bill,
What HP are you looking at when the motor is done...

What is the weight of your car ....

Posted By: Hemiroid

Re: Gotta little more done - 01/30/10 03:29 AM

Looking good Bill

Posted By: galen

Re: Gotta little more done - 01/30/10 07:04 AM

Making good progress Bill, I can't wait to see how much power it puts out.

Posted By: 383man

Re: Gotta little more done - 01/30/10 07:24 AM

Looking real fine.

Ron

Posted By: tboomer

Re: Gotta little more done - 01/30/10 11:42 AM

Looks good,Bill!

Posted By: 493_DART

Re: Gotta little more done - 01/30/10 11:54 AM

Looks great-----and looks like some FUN--- cant wait to put mine together,,, ,,except for, the ring filing !

Posted By: Dart1031

Re: Gotta little more done - 01/30/10 01:21 PM

Nice!

Posted By: 340RICK

Re: Gotta little more done - 01/30/10 01:32 PM

Lookin good Wild Bill

Posted By: Lawn Monkey

Re: Gotta little more done - 01/30/10 01:52 PM

Wild Bill

,,,,,,, Awesome , can I ask why paint the inside of thr block and what type of paint?

Posted By: VernMotor

Re: Gotta little more done - 01/30/10 02:38 PM

Inside of that motor is red !

Posted By: Thumperdart

Re: Gotta little more done - 01/30/10 02:43 PM

Lookin good........

There should be a pretty big difference in performance. What does your car weigh w/you on board?

Posted By: WILD BILL

Re: Gotta little more done - 01/30/10 03:03 PM

Scott's hoping for 700+ HP. I really don't know what to expect and am trying to remain realistic.

The paint was Rustoleum rust metal primer and it's purpose is to speed up oil return as well as seal the metal and seal in any residule casting sand that may still be there.

Car weighs 2820 W/o me and 2960 on the line. Might be a little less now with some parts on this build being lighter than what I was running.

Posted By: roadhazard

Re: Gotta little more done - 01/30/10 03:16 PM

Bill you are a real artist with that brush

I'll give you a call to paint mine on the next go around

You'll like having a painted block. It makes clean up a lot easier.

Should make some good power with a little wind in it

Posted By: wheelsup68dart

Re: Gotta little more done - 01/30/10 03:34 PM

10.60's

Posted By: WILD BILL

Re: Gotta little more done - 01/30/10 03:49 PM

Quote:

10.60's

ON the other hand, knowing my luck

Posted By: wheelsup68dart

Re: Gotta little more done - 01/30/10 03:52 PM

Bill, you should pack things up and come down toward Columbus to go to Mike DeChicos cancer benefit practice tree race this afternoon.

Posted By: WILD BILL

Re: Gotta little more done - 01/30/10 03:55 PM

I'm working

Posted By: '72CudaRacer

Re: Gotta little more done - 01/31/10 12:58 AM

Does that paint stay one pretty good? I wanted to paint the inside of mine, but was concerned that it would come off and clod up oil pick up or mess up oil pump.

What about out side? Just paint or primer first?
Brian

Posted By: Anonymous

Re: Gotta little more done - 01/31/10 01:04 AM

Quote:

Scott's hoping for 700+ HP. I really don't know what to expect and am trying to remain realistic.

The paint was Rustoleum rust metal primer and it's purpose is to speed up oil return as well as seal the metal and seal in any residule casting sand that may still be there.

Car weighs 2820 W/o me and 2960 on the line. Might be a little less now with some parts on this build being lighter than what I was running.

Wild bIll, 1st you should of painted the inside Blue!

2nd,your telling me you weigh 140 lbs.
Jesus, i weighed that as a freshman in High School.

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 01:19 AM

Quote:

Quote:

Scott's hoping for 700+ HP. I really don't know what to expect and am trying to remain realistic.

The paint was Rustoleum rust metal primer and it's purpose is to speed up oil return as well as seal the metal and seal in any residule casting sand that may still be there.

Car weighs 2820 W/o me and 2960 on the line. Might be a little less now with some parts on this build being lighter than what I was running.

Wild bIll, 1st you should of painted the inside Blue!

2nd,your telling me you weigh 140 lbs.
Jesus, i weighed that as a freshman in High School.

No I hit the wrong dam key.

I weigh around 160 so it should read 2980

I'm sure the paint will hold up fine inside the block.

Posted By: '72CudaRacer

Re: Gotta little more done - 01/31/10 01:23 AM

Are you going to also put paint on the inside, or leave it primer?

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 01:27 AM

Quote:

Are you going to also put paint on the inside, or leave it primer?

I'm sure I'll find out next Thur when I can get back out there

I did pick up the paint for the outside of the block though

Posted By: Lawn Monkey

Re: Gotta little more done - 01/31/10 01:44 AM

Wild Bill I have two 50 year old Farm All tractors they painted the inner block at the factory and not one speck of paint has flaked off either one,,, just thought I'd throw that in there..... I do like your idea

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 01:58 AM

It wasn't my idea. Scott does it to all the race motors he builds.

Posted By: blownzoom440

Re: Gotta little more done - 01/31/10 01:59 AM

scott just wants the primer inside.

Posted By: hemi-itis

Re: Gotta little more done - 01/31/10 02:49 AM

Bill,your car is about 1000 lbs lighter than my junk

Posted By: Anonymous

Re: Gotta little more done - 01/31/10 03:13 AM

Looks real nice Bill

Are you guys going back with the same rotating assembly or something with some more stroke? poppaj

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 03:30 AM

Most of last years motor is not being used. We are using the block and forged crank that I had in my garage.

It is a factory forged crank though so no stroker.

Pistons are from Weisco's Pro Tru line and the rods are K1 H beams. My old motor had Hyper pistons and LY rods W/ a cast crank.

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 03:32 AM

Quote:

Bill,your car is about 1000 lbs lighter than my junk

Start

then

Posted By: tboomer

Re: Gotta little more done - 01/31/10 04:30 AM

Bill...Did you go with flat tops or domes...Did ya pick a cam yet??

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 04:46 AM

Flat tops

The plan was to use to use my 555 solid flat tapet cam.

Then again not much of the original plan is holding true so

Posted By: wheelsup68dart

Re: Gotta little more done - 01/31/10 04:48 AM

You got some flow now out of the heads, scrap that street cam and get some wind in there. Just let Scott do his thing and let you write the checks. BTW who is building a trans to hold up to the new power level.

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 04:52 AM

Quote:

BTW who is building a trans to hold up to the new power level.

Posted By: max_maniac

Re: Gotta little more done - 01/31/10 04:53 AM

Quote:

Quote:

BTW who is building a trans to hold up to the new power level.

Bill , you still didn't answer the question

Russ

Posted By: tboomer

Re: Gotta little more done - 01/31/10 04:54 AM

Those look nice,Bill!! What are you gonna have for a compression??

Posted By: WILD BILL

Re: Gotta little more done - 01/31/10 04:55 AM

I built it.

ANd I'm hoping I don't have to do it again