Posted By: 6bblFLASH
Iron Disc Shelling - 01/24/10 03:34 PM
Ever see this before?
Sinstered iron disc,no clue the was a problem was working fine.
No heat marks.
Just looks like the facing never bonded?
Any experience?
Posted By: JERICOGTX
Re: Iron Disc Shelling - 01/24/10 04:22 PM
Yup, seen it before, and if you ask McLeod, they will say it's "normal". Has happened to a buddy of mine. McLeod told him to reinstall it until it wasn't working any more. He raced it quite a while after that... Never have had it happen with mine, and I've been through 3 disc's now. IF you do want to fix it, send the clutch to Tim Hyatt. After he reworked my clutch, it has been the best it has ever been. Mine will go back to him before going back to McLeod.
Jeff
Posted By: jamesc
Re: Iron Disc Shelling - 01/24/10 06:22 PM
imho doesn't seem like a very bright idea to run something like that given the imbalance it would create
Posted By: 6bblFLASH
Re: Iron Disc Shelling - 01/24/10 07:36 PM
NO WAY it will be run again till repaired.
I`m getting the "failure is normal" vibe from the soft-lok bunch.
Posted By: DoubleD
Re: Iron Disc Shelling - 01/24/10 08:12 PM
it's the consumable part - kinda scary looking though - and to have that thing buzzin around 7000 grand
put another couple of 100's in your hand and have a good laugh
Posted By: JERICOGTX
Re: Iron Disc Shelling - 01/25/10 02:31 PM
Do NOT send it back to McLeod... Send it to Tim Hyatt. It will be fixed right, and come with a thicker disc. Plus it will be cheaper then sending it back to mcLeod.
Jeff
Posted By: JERICOGTX
Re: Iron Disc Shelling - 01/26/10 02:06 AM
Can't beat that deal. Are they going to resurface the pressure plate, and flywheel also?
Jeff
Posted By: oldiron
Re: Iron Disc Shelling - 01/26/10 02:53 AM
free is good, well sort of free
i suspect that all of the readily available sintered iron disks are made at the same place, have a ram disk that looks just like my mcleod disk.....funny
Posted By: 6bblFLASH
Re: Iron Disc Shelling - 01/26/10 03:38 AM
I`m sending the whole thing back and see what they say.
I want to start fresh regardless who does the work or pays.