Vanke Hemi Intake Modification

My friend already has the intake and base plate, we can get the machining done locally.

Thanks Again for your help!

You have to leave(or weld) a 1/2" dam on the plenum floor(on the open side). Mopar used to have instructions on doing the mods. Look around and you might find them. You will also need the carbs setup for the different fuel distribution....jets, metering rods, clusters, linkage, etc.. Mopar used to sell the carb kit, PN2836137.

I ran that setup for many years so if you have any more questions, send me a pm.
Fred

Here's the print of the Vanke mod:

I have a 1.80MB Bitmap image that's larger/clearer but too big to post here.

Hi,
I've got a real vanke intake I've had laying around for 30plus years I can take pic's of if you wish.
Russ

i would not do it to a street car, it will run like crap. every car that i have worked on over the years that had the modification done we changed it back to a stock un-altered manifold.i have no experience with them in a dragrace only application.

The car is going to be a strip car.

Thanks! 52savovy, John Kunkel and old racer, I'll be contacting you guys if I have more questions
and probably will have questions.

John you can email the bigger file to me.

Look I found this...it just might be this mod..
http://www.moparmusclemagazine.com/techa...e/photo_20.html