Posted By: sc301v
GRP rod clearances - 12/01/09 07:24 PM
I lost my paperwork with my rods...Can someone please tell me the side clearances and bearing clearances for the GRP aluminum rods with 2.200 big ends.Thanks
Posted By: camastomcat
Re: GRP rod clearances - 12/02/09 01:27 PM
I like to run .0035 to .004 on bearing clearance, but I am not sure of the side clearance, .012-.015? I can call my machine shop later if no one responds, but I love the GRP's. They make good power, and last quite a while.
Posted By: Mike Swann
Re: GRP rod clearances - 12/02/09 01:38 PM
Jounal is 0.0026 to 0.0033 as I run them.
Side clearance, 0.025 minimum. I have seen guys that have put normal width chevy rods on an offset ground mopar journals and ran them, so I dont think maximum clearance will be an issue.