Moparts

SB Motor plate

Posted By: 412 SB Duster

SB Motor plate - 10/14/09 12:25 PM

Who's SB Motor plate do you recommend. I what one that looks good as well.

Thanks
Al

Posted By: dc426

Re: SB Motor plate - 10/14/09 12:55 PM

here's mine I got from NHRAMark....

Posted By: 10 o to go

Re: SB Motor plate - 10/14/09 02:47 PM

Al
Mark helped with the MMW race thier website is aeicnc.com .
don

Attached picture 5544509-BKD9-09-15_032A.jpg

Posted By: ETASPEN

Re: SB Motor plate - 10/14/09 04:43 PM

Nice piece Mark has...on my wish list also.
http://www.aeicnc.com/sbdpro36.html

Posted By: 412 SB Duster

Re: SB Motor plate - 10/14/09 05:55 PM

Thanks guys, I'll get in touch with Mark. I need to get it setup before I pull the motor.

Thanks again
Al

Posted By: StrokerDart

Re: SB Motor plate - 10/14/09 06:32 PM

What do you guys use for an engine limiter (for/aft movement) in these A-bodies when you put in a motor plate ??

Posted By: StrokerDart

Re: SB Motor plate - 10/15/09 01:46 PM

Quote:

What do you guys use for an engine limiter (for/aft movement) in these A-bodies when you put in a motor plate ??

...or if you use a 3/8" think plate, is a limiter just not needed ???

(sorry for hijacking this post)
thanks guys!

Posted By: 1976 Aspen

Re: SB Motor plate - 10/16/09 11:53 AM

SOmething has to limit the fore/aft movement on??? Any pics or info guys???

Posted By: 408strokerdart

Re: SB Motor plate - 10/16/09 12:27 PM

Quote:

Quote:

What do you guys use for an engine limiter (for/aft movement) in these A-bodies when you put in a motor plate ??

...or if you use a 3/8" think plate, is a limiter just not needed ???

(sorry for hijacking this post)
thanks guys!

3/8" plate helps, but plate is not very strong in that direction (thin cros section). You still need a limiter. I only have one and it comes from a bracket that I made to attach to the original motor mount locations on the block down to a clevis bracket welded to the k-frame. I don't have pic's on my work computer to share. Good luck.

Posted By: B3422W5

Re: SB Motor plate - 10/16/09 04:06 PM

Al, why are you going to a motor plate???

Posted By: 412 SB Duster

Re: SB Motor plate - 10/16/09 05:04 PM

Looking to remove some weight off the front end. Going to make a new K member.

Al

Posted By: B3422W5

Re: SB Motor plate - 10/16/09 05:05 PM

Quote:

Looking to remove some weight off the front end. Going to make a new K member.

Al