Moparts

Anyone run this water pump setup?

Posted By: ProSport

Anyone run this water pump setup? - 10/12/09 03:42 AM

Anyone run this housing with this pump?

I'm wondering what the overall depth would be compared to the 6.8" that my Meziere takes up?
Posted By: 68valiant68

Re: Anyone run this water pump setup? - 10/12/09 04:33 AM

the pump looks like mine, the one in my car is a cvs? maybe they make it for summit. I know the old summit fuel pumps were made by holley. I have had the pump in my car for 4 years. still works good. Eats up a lot of battery though.
Posted By: ProSport

Re: Anyone run this water pump setup? - 10/12/09 11:54 AM

Have you measured the overall depth?
Posted By: Dunnuck Racing

Re: Anyone run this water pump setup? - 10/12/09 12:31 PM

I run that pump,from Summit.The aluminum housing I bought elsewhere years ago,not sure of the brand,but I would assume they are the same depth.
The Summit pump I bought does have CVR on the housing.I just measured mine,5 3/4" from the engine plate to the farthest outward area. I hope that helps.
Posted By: marvo451

Re: Anyone run this water pump setup? - 10/12/09 03:52 PM

This JEGS link shows a pump with more GPM and it is shorter, too
http://www.jegs.com/i/JEGS/555/50930/10002/-1#
Posted By: ProSport

Re: Anyone run this water pump setup? - 10/15/09 03:13 AM

Quote:

This JEGS link shows a pump with more GPM and it is shorter, too
http://www.jegs.com/i/JEGS/555/50930/10002/-1#




50gpm and takes up less space.
Posted By: Chassisman

Re: Anyone run this water pump setup? - 10/15/09 03:21 AM

Quote:

Anyone run this housing with this pump?

I'm wondering what the overall depth would be compared to the 6.8" that my Meziere takes up?


I run that set up in my Dart....I also run and aluminum rad and electric fan...the rad is almost in stock location...and it's all...REALLY TIGHT.
© 2024 Moparts Forums