408 intake /carb help

building a 408 street/strip motor. short block is at machine shop & edelbrock heads are on there way to ryanjfor stage 2. diamond pistons 10.8, cam is hughes 4248 solid (.543/.563 242/248) 4:10 gear ,4speed,3300#(already have torker 2 and 750dp off old motor )shift point 6300,6500?? tti step headers . neeed intake and carb ??thanks

If Ryans doin the heads, he will be the best shot on the right intake system advice + he has dynoed a ton of small blocks <takes out a lot of guess work>

Carbs ok. I'd stick a port matched Victor 340 Junior under it.

I run almost the same set up with an automatic. I run a edelbrock RPM airgap to help with the heavy car. I also run a 750 double pumper that was worked by the carb shop to flow 830cfm. It likes more carb
and I have run a regular 850 on it. It really likes the more top end air but I have trouble getting it to idle very well with that 850. The air gap seems to run well with it I shift at 6 or 6200. My 68 cuda runs 7.01 at 96.5 in the 8th.

vic jr and a 950 on mine,

i've never seen a victor jr ,anybody have a pic .is the jr the same as the victor 340 or is it somewhere between the torker 2 and the victor 340

Quote:

---

i've never seen a victor jr ,anybody have a pic .is the jr the same as the victor 340 or is it somewhere between the torker 2 and the victor 340

---

the victor is sometimes referred to victor jr...now that there is a super victor.