Moparts
Trans cooler circuit
Posted By:
TRENDZ
Trans cooler circuit -
10/04/09
08:11 PM
Anybody out there know what the normal trans cooler pressure would/ should be at idle? I'm also wondering what it would be at higher rpm.
Posted By:
Cab_Burge
Re: Trans cooler circuit -
10/05/09
01:19 AM
I have never measured it but I remember around 3 to 7 lbs as the amount of pressure on them, not much
I have removed one side to drain some fluid out by starting the motor, it doesn't comeout real fast
It doesn't seem to be under very much pressure
© 2024
Moparts Forums