Tubular A Arms?

Posted By: LA360

Tubular A Arms? - 09/29/09 03:47 AM

How much more caster can you get with Tubular A Arms?

Which ones are worth looking into?

Thanks
AL....

Posted By: S/ST 3040

Re: Tubular A Arms? - 09/29/09 01:07 PM

I have RMS uppers with heim joints. I can get over 8� positive caster
with them. (3�-3.5� recommended for drag racing)

My brother bought the CAPs with urethane bushings. They told him there
was already 1� or 2� positive over OEM, as shipped. (adjustable as well)

Old Post

Check with Bondobob on his.

Posted By: LA360

Re: Tubular A Arms? - 09/29/09 11:08 PM

I need the small ball joint which will remove a few from the list. Anyone else?
AL....

Posted By: moparguy7074

Re: Tubular A Arms? - 09/29/09 11:21 PM

BobsProFab.com

Posted By: scottb

Re: Tubular A Arms? - 09/29/09 11:52 PM

Quote:

BobsProFab.com

2nd that

Posted By: badwej

Re: Tubular A Arms? - 09/30/09 12:09 AM

Quote:

I need the small ball joint which will remove a few from the list. Anyone else?
AL....

drill the spindal

Posted By: LA360

Re: Tubular A Arms? - 09/30/09 12:11 AM

Quote:

Quote:

I need the small ball joint which will remove a few from the list. Anyone else?
AL....

drill the spindal

The large ball joint would be an import, I can go down to any parts store and pic up one of the small ball joints.
AL....

Posted By: moparguy7074

Re: Tubular A Arms? - 09/30/09 12:11 AM

here is a pic.

Attached picture 5513660-5172541-SDC10301.jpg

Posted By: mopar dave

Re: Tubular A Arms? - 09/30/09 01:24 AM

you can use the large or small ball joint with the CAP arms. i just coverted over to the large joints on the CAP arms, way better geometry and strength.

Posted By: JRepucci

Re: Tubular A Arms? - 09/30/09 05:13 AM

How much weight do you think you save by going to willwood discs, and tubular upper and lower control arms over stock pieces and drum brakes on an A-body?