Moparts
904 straight cut planetaries????
Posted By:
jb15
904 straight cut planetaries???? -
09/28/09
10:36 PM
Are there any companies making straight cut planetaries for 904's? and is a roller trany worth any E.T gains ,thanks... Jim
Posted By:
LA360
Re: 904 straight cut planetaries???? -
09/28/09
10:42 PM
I believe Pro Trans do, A&A were in the process of making them.
AL....
Posted By:
S/ST 3040
Re: 904 straight cut planetaries???? -
09/28/09
10:48 PM
Jim, I think with big power and light weight car, gains will be minimal
in comparison to a 3400 lb. stock eliminator with 400 HP.
I'd think the gains would not offset the cost........unless you are REALLY
serious obout that last .01 second.
Posted By:
jb15
Re: 904 straight cut planetaries???? -
09/28/09
10:56 PM
No,a .01 gain would really suck, ha ha . but i was thinking maybe a 2.08,2.10ish low gear, would would be better than the 2.45's out of the hole???. Jim
Posted By:
S/ST 3040
Re: 904 straight cut planetaries???? -
09/28/09
10:58 PM
It appears to be doing alright.
© 2024
Moparts Forums