Posted By: Sub95
custom cam? who - 09/25/09 12:10 AM
I know we have a few good shops that do them, but who are they?.
Thanks
Posted By: Bigcube
Re: custom cam? who - 09/25/09 12:23 AM
More important than whos cam it is would be who specs the grind. For that check with Dwayne Porter. I got a custom Comp cam for him and it was a good improvement over the cam I had before.
Posted By: Anonymous
Post deleted by Defbob - 09/25/09 12:53 AM
Posted By: Anonymous
Re: custom cam? who - 09/25/09 12:58 AM
Cam Motion or LSM
give them the specs, you'll be happy with what you get.
Posted By: Sub95
Re: custom cam? who - 09/25/09 04:12 AM
Have a website or number for them?
Thanks
Posted By: Al_Alguire
Re: custom cam? who - 09/25/09 06:00 AM
Another vote for Scott Brown here..Every cam i have gooten from him has made power!
Posted By: Cudafied
Re: custom cam? who - 09/25/09 09:56 AM
I used cam motion for the last 2 custom ground roller cams
http://www.cammotion.comI've also used Crower for custom grinds in the past with good results
http://www.crower.com
Posted By: Jacob Pitt
Re: custom cam? who - 09/25/09 10:47 AM
I have a Scott Brown cam in my Challenger and it runs great for being on the small side for my cubes. It was built for a 451 and I reused it in my 499.
I also have a custom Bullet cam in my small block 422 that's in the Dart Sport that also runs low 6's in the 1/8th. The Bullet is pretty big but makes great torque. Both companies made me a great product.
Posted By: topbrent
Re: custom cam? who - 09/25/09 12:26 PM
Tim Goolsby @ Bullet Cams will spec out a great cam for you.
http://www.bulletcams.com/Call Bullet Racing Cams at (662)893-5670.
Posted By: Lil Demon
Re: custom cam? who - 09/25/09 04:04 PM
My next cam will be from Scott Brown.
Posted By: Anonymous
Re: custom cam? who - 09/26/09 01:35 PM
Talk to Dwayne.
Scott knows his stuff as well!
Can't go wrong with either choice!
RandyB
Posted By: CaptNemo
Re: custom cam? who - 09/28/09 02:15 AM
A ghost from the past votes for Scott Brown.
.
Posted By: dynamite
Re: custom cam? who - 09/28/09 02:56 AM
Tim at Bullit did mine and I was very happy with the results
Posted By: an8sec70cuda
Re: custom cam? who - 09/28/09 12:11 PM
Call Dwayne Porter at 802-951-1955. You won't be sorry.
CHIP
Posted By: mshred
Re: custom cam? who - 09/29/09 02:10 AM
how should you expect to pay for a custom cam from anyone of these guys??
Just got a custom grind from Bullit looks like a nice piece but only time will tell